ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

supra calipers and discs do they fit?

Want to know what to brakes/springs to buy?
turbotezza
Trc Off
Posts: 66
Joined: Fri Dec 06, 2013 8:48 am

supra calipers and discs do they fit?

Postby turbotezza » Thu Sep 25, 2014 5:38 pm

as title says anyone know if supra calipers and discs fit as an upgrade?

ESXTEZZ
Tezza Fanatic!
Posts: 359
Joined: Sun Jan 30, 2011 12:46 pm
Location: Essex England
Contact:

Re: supra calipers and discs do they fit?

Postby ESXTEZZ » Thu Sep 25, 2014 7:18 pm

you will need spacers for the lower control arms (anti bump steer spacers), you will also need an adapter for the caliper to allow fitment to the altezza/is200 hub. You can buy all the parts from figs engineering, for $330
For the same price you can buy a caliper adaptor that allows you to keep your standard calipers and use supra disks.
I used ls400 4 pots and they are a huge upgrade over the stock brakes, I was already using uprated pads and disks with braided lines before I swapped.

Soiled
Altezza Guru
Posts: 705
Joined: Sat Dec 11, 2010 3:35 pm

Re: supra calipers and discs do they fit?

Postby Soiled » Thu Sep 25, 2014 8:44 pm

They do.

Picture of mine, just with the FIGs push in adaptors.

Image
By SoiledAltezza at 2010-07-11

Part link:
http://shopfigs.com/v1/index.php?route= ... duct_id=60


Return to “Brakes and Suspension”

Who is online

Users browsing this forum: No registered users and 1 guest

cron