xnickx wrote:Don't do it!
The stock 1GFE rods only handle 6psi max, and on 6psi you make less power then an RS200's 3SGE at the wheels still!
ACNZ has had about 5-6 engines with holes through the side of the block due to s@3! stock rods.
3SGE FTW! (Or 3SGE+T)
Won't work as the 3SGTEs are FWD or 4WD engines (MR2's engine literally a FWD engine anyway), and the oil galleries etc won't work with out car cause the engine would be mounted the other way, head different too, and manifolds won't line up.
If it was able to be done many would have jumped on that boat by now
Keith83 wrote:Cheers lads,
I was thinking that the internals were too soft, to take a charger.
Ah i justed wanted something different, not to many supercharged is200's going around. now i know why as nick mentioned.
ah dont know what to do. it would be hard to shift a car these days.
so i may be stuck with her. ah well. all for a bit of fun.
thanks again lads.
im off to enjoy the sun.
Users browsing this forum: No registered users and 1 guest