cleaned the maf sensor, with brake and clutch cleaner, big difference,
if anyone hasn't done this with their car , do it over weekend, only takes a few min and €5 for the spray
http://forum.altezzaclub.org.au/ar/t2050.htm
Evelyn wrote:Should you alway feel the sinsation of the vvti, I only get in from 1st to 2nd only about 80% of the time, should I be getting the feeling of it trough all the gears?????
roberte wrote:You should, to an extent. The power curve on mine tops out at around 7,200RPM. It has more of an effect in the lower gears. What kind of air filter are you using? A high-flow filter will give you an extra kick.
R.
eddie85 wrote:roberte wrote:You should, to an extent. The power curve on mine tops out at around 7,200RPM. It has more of an effect in the lower gears. What kind of air filter are you using? A high-flow filter will give you an extra kick.
R.
Could you recommend one? Might look into it. I cleaned my MAF sensor tonight too, it was manky! God it made some difference, I didnt want to park it up when I got homeI highly recommend to anybody who hasnt done it, DO IT!!
Dan wrote:@ Rob, what butchering do you need to do to get an induction kit to fit an Altezza?
What kind of air filter are you using?
Rob wrote:Dan wrote:@ Rob, what butchering do you need to do to get an induction kit to fit an Altezza?
All I mean is you don't need to remove any parts to put in a panel filter.
On another note, putting in an induction kit sometimes 'aint all it's cracked up to be. Check this out:
http://www.mkiv.com/techarticles/filters_test/2/
R.
Return to “Engine & Transmission section”
Users browsing this forum: No registered users and 2 guests