TezzaWorld

The home of those with a passion for Altezzas

Skip to content

ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

Rotors

Anything related to bodykits, wheels lights & other exterior things, post here
Post Reply
Ae111RS200
Trc On!
Posts: 53
Joined: Tue Jul 09, 2013 5:15 pm

Rotors

Postby Ae111RS200 » Mon Nov 25, 2013 12:07 am

i need some help again :? i am trying to find some nice looking inexpensive rotors for my tezza. would the ones for lexus is250 fit?

http://www.ebay.com/itm/270908234667

or would the ones for the is300 fit?
http://www.ebay.com/itm/FRONT-REAR-KIT- ... a5&vxp=mtr
Top
User avatar
altezza kc
Trc On!
Posts: 38
Joined: Tue Jul 09, 2013 3:08 pm
Location: cork

Re: Rotors

Postby altezza kc » Mon Nov 25, 2013 1:04 am

is300 ones will fit
Top
Ae111RS200
Trc On!
Posts: 53
Joined: Tue Jul 09, 2013 5:15 pm

Re: Rotors

Postby Ae111RS200 » Mon Nov 25, 2013 10:39 pm

altezza kc wrote:is300 ones will fit

thanks alot but are you 100% sure they will work? would be a long way to ship them to the caribbean and they don't work :(
Top
ESXTEZZ
Tezza Fanatic!
Posts: 359
Joined: Sun Jan 30, 2011 12:46 pm
Location: Essex England
Contact:
Contact ESXTEZZ

Re: Rotors

Postby ESXTEZZ » Tue Nov 26, 2013 5:52 pm

Ae111RS200 wrote:
altezza kc wrote:is300 ones will fit

thanks alot but are you 100% sure they will work? would be a long way to ship them to the caribbean and they don't work :(



yes they will fit 100%
Top
Ae111RS200
Trc On!
Posts: 53
Joined: Tue Jul 09, 2013 5:15 pm

Re: Rotors

Postby Ae111RS200 » Thu Nov 28, 2013 11:47 am

thanks for your help guys :)
Top
User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:
Contact E910

Re: Rotors

Postby E910 » Thu Nov 28, 2013 10:36 pm

Not 100%. If you've got a base model RS200 auto some came with single pot calipers & smaller disc, 275mm rather than the usual 296mm & twin pots on the front. Check your rotors OD before ordering anything.
Top
Ae111RS200
Trc On!
Posts: 53
Joined: Tue Jul 09, 2013 5:15 pm

Re: Rotors

Postby Ae111RS200 » Sat Nov 30, 2013 4:32 pm

E910 wrote:Not 100%. If you've got a base model RS200 auto some came with single pot calipers & smaller disc, 275mm rather than the usual 296mm & twin pots on the front. Check your rotors OD before ordering anything.

mines is a manual version would that be ok?
Top
User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:
Contact E910

Re: Rotors

Postby E910 » Sun Dec 01, 2013 8:50 am

Pull a front wheel off & check the diameter of your rotors before you order anything.
Top
Post Reply

Return to “Visual & Exterior section”

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB® Forum Software © phpBB Limited