ITCC ALTEZZA Build

[tezzasligo]

nice car could dat ecu work on a beams engine?
and if so would u sell it?

[THE BOM3]

nice car could dat ecu work on a beams engine?
and if so would u sell it?

That is one of the best ecu's money can buy BUT!! The problem is that you have to have the specific efi tuning lead to map it. I don't have one and without the wiring loom I have your talking £400 sterling for the connector for the ecu. I am selling it but its to a lad to use for a spare for his 307btcc car.

[THE BOM3]

Progress is slow at the minute not going to make the first round of Itcc unfortunately but what can you do.
Here's a few bits I have to go into the car once its time to go back together

The Full loom


GEMS Dash

[twiglett-RS200]

any updates on this?

[THE BOM3]

any updates on this?

Yes

It's been a while since I updated here. There has been a lot of work done over the last month or so and it looking more like a car again! The cage is finished!!! All the work is done by GripFab (John&Brendan Stone) the work is top class as always!!!

[Steve86]

Nice Project fella.. cant wait to see how u go about

[IanS200]

That is one hell of a project..

[THE BOM3]

Been doing some more bits over the last few days. Had to move the gear stick back in the car by 180mm so I could change gear when sitting back in the car. So we decided to extend the rod coming out of the box and move the gears tick mounting point back as it would keep the positive feel from the standard s2000 shifter.
Here is the rod we machined to extend the selector rod


And the heartsick mount moved back 180mm

[THE BOM3]

It's Paint time at last!!! Got everything etch primed today paint will be finished tomorrow.

[THE BOM3]

So I got the car painted inside last week and after a few days baking in the sun it was ready to start putting it back together. Ill up date pics as I go hope to have it ready to go in a month all going well.

[THE BOM3]

Few updates. Rear doors trimmed down and fitted few more kg's saved



Seat fitted



Tilton pedal box fitted

[donut46]

Cage is a serious piece of kit!! Tilton pedal box looks like a tasty piece of it too, great build

[THE BOM3]

Front subframe finished and rack mounted up

[ISred02]

Cage is a serious piece of kit!! Tilton pedal box looks like a tasty piece of it too, great build

X2

[THE BOM3]

More progress steering colum in and connected up











Tilton pedal box bolted in and plumbed up





New discs and reconditioned calipers