Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

2.2 hks stroker kit

Post info/questions on engine mods and issues here
Tez
Tezza Fanatic!
Posts: 322
Joined: Mon Mar 05, 2007 12:06 am
Location: dublin

2.2 hks stroker kit

Postby Tez » Tue Mar 20, 2007 6:28 pm

whats needed to make it work?why is there a 86mm and 87mm pistons?

User avatar
elexes
Altezza Guru
Posts: 1368
Joined: Sun Mar 04, 2007 1:20 am
Location: Tullamore , Offaly

Postby elexes » Tue Mar 20, 2007 6:58 pm

lots of work done its not as simple as grab new rods throw them in

there is a turbo version and there is a non turbo version . you need to decide what one your getting
if ive helped you in anyway vote for carlow to be the first tezzaworld drinking session

User avatar
Dizz
Site Admin
Posts: 966
Joined: Sat Feb 24, 2007 12:52 am
Location: Dublin
Contact:

Re: 2.2 hks stroker kit

Postby Dizz » Tue Mar 20, 2007 7:27 pm

Tez wrote:whats needed to make it work?why is there a 86mm and 87mm pistons?


The kit should be a complete kit basically consisting of crankshaft, conrods, pistons (& possibly piston rings). The reason for the bigger pistons is basically if u had more wear to the engine u'd bore out the chambers to the bigger size. You get some people thinking that it's to increase the capacity of the engine (which it does) but to be honest it's pretty negligible...

Would be good to this if you were planning on uprating your internals anyway :)

Hope this help ;)

User avatar
endapender
Altezza Guru
Posts: 842
Joined: Sun Mar 04, 2007 2:57 pm
Location: kerry

Postby endapender » Tue Mar 20, 2007 7:44 pm

TODA also do the 2.2 stroker kits

User avatar
daws
Trc Off
Posts: 91
Joined: Tue Mar 13, 2007 1:35 pm
Location: Meath
Contact:

Postby daws » Tue Mar 20, 2007 10:06 pm

Jun also do a 2.2 stroker kit... for any of these your talkin about 4,000 euro dats just for the kit and not the work or your engine to be bored,, then you also need a steel after market head gasket which will cost around 200 hundred, there a tuning place down in mullingar called gunt tuning they do the toda kit and will do the work,, to bore the block they gave me a price of 250 and then the labour they coulnt say, head gasket about 200,, the kit was a high compression kit with 87mm pistons..
but i was looking at putting a stroker kit in to my new turbo altezza durin this year which i would then be goin for a low compression kit with 87mm pistons, lower compression higher u can boost on da turbo without mincing ur engine but at 5-6,000 euro its an expensive upgrade
Turbo power!!

Tez
Tezza Fanatic!
Posts: 322
Joined: Mon Mar 05, 2007 12:06 am
Location: dublin

Postby Tez » Tue Mar 20, 2007 11:15 pm

would a 2.2 turbo tezza be pushing out mental power?

User avatar
Noel
Moderator
Posts: 3726
Joined: Sat Mar 03, 2007 6:18 pm
Location: oldville

Postby Noel » Tue Mar 20, 2007 11:33 pm

Tez wrote:would a 2.2 turbo tezza be pushing out mental power?


Ask Elexes, thats exactly what he's doing at present :D

User avatar
daws
Trc Off
Posts: 91
Joined: Tue Mar 13, 2007 1:35 pm
Location: Meath
Contact:

Postby daws » Wed Mar 21, 2007 5:26 pm

well the guy in gunt tuning told me with the turbo and 2.2 stroker kit u should upgrade alot more,, like fuel pump, oil pump, oil cooler kit, injectors, etc. but he said bhp wise u would be talkin 350 or so depends on da stroker kit and da size of the turbo, but remember it would al be goin to da rear wheels, which is quite alot,, at that stage your traction control will do nothin for u
i was also told that the turbo might be usless wit a 2.2 stroker kit if its not big enough which would mean goin for a bigger turbo..[/img]
Turbo power!!

User avatar
Dizz
Site Admin
Posts: 966
Joined: Sat Feb 24, 2007 12:52 am
Location: Dublin
Contact:

Postby Dizz » Wed Mar 21, 2007 6:06 pm

daws wrote:i was also told that the turbo might be usless wit a 2.2 stroker kit if its not big enough which would mean goin for a bigger turbo..


No that's not true, it will produce slightly less pressure but still pack a punch. You can't run the pressures these turbos are designed for anyway...

User avatar
elexes
Altezza Guru
Posts: 1368
Joined: Sun Mar 04, 2007 1:20 am
Location: Tullamore , Offaly

Postby elexes » Wed Mar 21, 2007 6:13 pm

im upgrading a lot . its not just to take into account to the 2.2 but a lot more . the lad in grunt is very expensive but very good . alas out of my price range by about 5k

ill be posting up pics ad stuff of my car once its done . but tez hope your car comes into the country with no added costs and that the dock workers dont touch it
if ive helped you in anyway vote for carlow to be the first tezzaworld drinking session

User avatar
endapender
Altezza Guru
Posts: 842
Joined: Sun Mar 04, 2007 2:57 pm
Location: kerry

Postby endapender » Wed Mar 21, 2007 9:47 pm

Nearly time for elexes to start a project thread for all of us to aspire too. Sounds very good what is being done

Tez
Tezza Fanatic!
Posts: 322
Joined: Mon Mar 05, 2007 12:06 am
Location: dublin

Postby Tez » Tue Mar 27, 2007 10:18 am

i mite just go for the toda pistons and rods because i just want to boost over 1bar i dont think does 200cc's will make a differance.

User avatar
elexes
Altezza Guru
Posts: 1368
Joined: Sun Mar 04, 2007 1:20 am
Location: Tullamore , Offaly

Postby elexes » Tue Mar 27, 2007 10:21 am

well they almost cost the same theres not much in the price difference .
if ive helped you in anyway vote for carlow to be the first tezzaworld drinking session

Tez
Tezza Fanatic!
Posts: 322
Joined: Mon Mar 05, 2007 12:06 am
Location: dublin

Postby Tez » Tue Mar 27, 2007 10:46 am

whens your build finished?will the 2.2 kit be reliable on high boost?

User avatar
elexes
Altezza Guru
Posts: 1368
Joined: Sun Mar 04, 2007 1:20 am
Location: Tullamore , Offaly

Postby elexes » Tue Mar 27, 2007 11:26 am

there basicly the same pistons . made by the same ppl using the same materials . so id say there shouldnt be any probloms
if ive helped you in anyway vote for carlow to be the first tezzaworld drinking session


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 1 guest

cron