ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

clutch

Post info/questions on engine mods and issues here
User avatar
mandy2009x
Tezza Fanatic!
Posts: 434
Joined: Mon Feb 16, 2009 4:08 pm
Location: cavan
Contact:

clutch

Postby mandy2009x » Mon Sep 21, 2009 2:39 pm

i was reading through post about the is200 clutches wont fit the altezza,
i was on to these and they said this will fit the altezza, so now im lost :?
http://cgi.ebay.ie/LEXUS-IS200-GENUINE- ... 286.c0.m14
Image

User avatar
Richie_c
Altezza Guru
Posts: 1744
Joined: Tue Feb 19, 2008 1:07 pm
Location: Everywhere
Contact:

Re: clutch

Postby Richie_c » Mon Sep 21, 2009 2:43 pm

I dont think they fit mandy but I'm not 100% sure on that
300 rwhp thanks to
Image

User avatar
roundymoony
Altezza Guru
Posts: 1579
Joined: Wed Aug 27, 2008 12:47 am
Location: Waterford

Re: clutch

Postby roundymoony » Mon Sep 21, 2009 7:23 pm

I was told that the clutch from a diesel avensis will fit an altezza ans is better than a standard.I dont know how true this is but worth looking into.

User avatar
mandy2009x
Tezza Fanatic!
Posts: 434
Joined: Mon Feb 16, 2009 4:08 pm
Location: cavan
Contact:

Re: clutch

Postby mandy2009x » Mon Sep 21, 2009 8:02 pm

realy :o
:lol: :lol:
Image

User avatar
podgie
Altezza Guru
Posts: 585
Joined: Sun Apr 13, 2008 2:12 pm
Location: galway. sligo durling week

Re: clutch

Postby podgie » Mon Sep 21, 2009 8:39 pm

@roundymoony.. i was told the same
bubbstezza wrote:i can be a good lookin girl..............sometimes :lol:

^^^^
ya heard it here first,, bubbstezza like dressing up as a women

ADC Sligo Rep

join

www.afterdarkcruisers.com

User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:

Re: clutch

Postby E910 » Mon Sep 21, 2009 10:22 pm

Talk about repost :!: IS200 clutch will not fit it a RS200 & neither will an diesel Avensis :roll:

http://www.tezzaworld.com/viewtopic.php?f=9&t=3383

User avatar
Dan
Site Admin
Posts: 3792
Joined: Sat Feb 24, 2007 3:43 pm
Location: Dublin

Re: clutch

Postby Dan » Mon Sep 21, 2009 10:46 pm

just by a standard altezza clutch unless ur sticking a turbo in its grand!

User avatar
skuzzy
Galway Rep
Posts: 621
Joined: Wed Sep 05, 2007 10:07 am
Location: galway

Re: clutch

Postby skuzzy » Tue Sep 22, 2009 9:45 am

parts are use who is the site trader are sellin exedy clutch kits for €250 for altezza at the mo. he has them in a add on the autotrader
GALWAY REP

Image

User avatar
mandy2009x
Tezza Fanatic!
Posts: 434
Joined: Mon Feb 16, 2009 4:08 pm
Location: cavan
Contact:

Re: clutch

Postby mandy2009x » Tue Sep 22, 2009 10:32 am

skuzzy wrote:parts are use who is the site trader are sellin exedy clutch kits for €250 for altezza at the mo. he has them in a add on the autotrader


oh cheers :) i best get 1 cause mine is slipping :evil: :evil:
Image

User avatar
roundymoony
Altezza Guru
Posts: 1579
Joined: Wed Aug 27, 2008 12:47 am
Location: Waterford

Re: clutch

Postby roundymoony » Tue Sep 22, 2009 11:49 am

E910 wrote:Talk about repost :!: IS200 clutch will not fit it a RS200 & neither will an diesel Avensis :roll:

http://www.tezzaworld.com/viewtopic.php?f=9&t=3383


my bad :oops:

User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:

Re: clutch

Postby E910 » Tue Sep 22, 2009 10:44 pm

skuzzy wrote:parts are use who is the site trader are sellin exedy clutch kits for €250 for altezza at the mo. he has them in a add on the autotrader
Just remember if you get an aftermarket clutch then you'll also need a solid flywheel to go with it as they wont work with the factory duel mass.

User avatar
Evelyn
Moderator
Posts: 6062
Joined: Mon Sep 10, 2007 9:06 pm
Location: Galway
Contact:

Re: clutch

Postby Evelyn » Tue Sep 22, 2009 11:12 pm

An exedy organic should work with a dual mass!!! should it????
Image

User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:

Re: clutch

Postby E910 » Wed Sep 23, 2009 5:17 am

After a quick look on the Exedy site it looks like they do kits to suit both the OE duel mass & solid flywheels.

TYK-7408 - Suits duel mass flywheel (not included). Just remember 90% of the time you will have to change the flywheel as you can't machine/skim them.

TYK-7378FW - Replacement kit, solid flywheel included.


Mandy you could always contact Exedy UK direct & see what they can do for you http://www.exedy.co.uk

User avatar
mandy2009x
Tezza Fanatic!
Posts: 434
Joined: Mon Feb 16, 2009 4:08 pm
Location: cavan
Contact:

Re: clutch

Postby mandy2009x » Wed Sep 23, 2009 11:49 am

so if i get that exedy clutch from parts r us i need to buy a flywheel also? :?
Image

User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:

Re: clutch

Postby E910 » Wed Sep 23, 2009 11:20 pm

mandy2009x wrote:so if i get that exedy clutch from parts r us i need to buy a flywheel also? :?
Yes


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 2 guests