Page 1 of 1

switch from open pod back to original air box.......

Posted: Mon Jun 04, 2007 3:24 am
by hansc
guys,

i am planning to switch back from my current blitz open pod filter to the original filter box settings.......

any problems that will occur and any precautions that i should take?

Posted: Mon Jun 04, 2007 11:42 am
by Dan
id just reset the ECU give the MAF sensor a cleaning and clean the throttle body valve area. It will be so much quieter to drive too!

Posted: Mon Jun 04, 2007 2:40 pm
by Mr. Tezza
Like dan said reset the ecu anyway, cleaning the sensor prob wudn't do any harm either

Posted: Thu Jun 07, 2007 1:16 pm
by hansc
btw, how do u clean the MAF sensor?

Posted: Thu Jun 07, 2007 2:08 pm
by Dan
Very carefully!! I just used a small cotton ear bud and some water. Im not sure what else you could use that wouldnt damage the sensors. They are very delicate metal bars, just wipe them gently

Posted: Thu Jun 07, 2007 2:23 pm
by Noel
Dan wrote:Very carefully!! I just used a small cotton ear bud and some water. Im not sure what else you could use that wouldnt damage the sensors. They are very delicate metal bars, just wipe them gently


don't use water... use electrical contact cleaner, comes in a spray can about 8 quid will last years or you can do a group clean...lol