Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

switch from open pod back to original air box.......

Post info/questions on engine mods and issues here
User avatar
hansc
Noob!
Posts: 10
Joined: Sat Apr 14, 2007 5:35 pm
Location: Kuala Lumpur, Malaysia

switch from open pod back to original air box.......

Postby hansc » Mon Jun 04, 2007 3:24 am

guys,

i am planning to switch back from my current blitz open pod filter to the original filter box settings.......

any problems that will occur and any precautions that i should take?

User avatar
Dan
Site Admin
Posts: 3792
Joined: Sat Feb 24, 2007 3:43 pm
Location: Dublin

Postby Dan » Mon Jun 04, 2007 11:42 am

id just reset the ECU give the MAF sensor a cleaning and clean the throttle body valve area. It will be so much quieter to drive too!

User avatar
Mr. Tezza
Kerry Rep
Posts: 1042
Joined: Sun Mar 04, 2007 10:20 am
Location: Killarney, Co. Kerry

Postby Mr. Tezza » Mon Jun 04, 2007 2:40 pm

Like dan said reset the ecu anyway, cleaning the sensor prob wudn't do any harm either
Kerry Rep

User avatar
hansc
Noob!
Posts: 10
Joined: Sat Apr 14, 2007 5:35 pm
Location: Kuala Lumpur, Malaysia

Postby hansc » Thu Jun 07, 2007 1:16 pm

btw, how do u clean the MAF sensor?

User avatar
Dan
Site Admin
Posts: 3792
Joined: Sat Feb 24, 2007 3:43 pm
Location: Dublin

Postby Dan » Thu Jun 07, 2007 2:08 pm

Very carefully!! I just used a small cotton ear bud and some water. Im not sure what else you could use that wouldnt damage the sensors. They are very delicate metal bars, just wipe them gently

User avatar
Noel
Moderator
Posts: 3726
Joined: Sat Mar 03, 2007 6:18 pm
Location: oldville

Postby Noel » Thu Jun 07, 2007 2:23 pm

Dan wrote:Very carefully!! I just used a small cotton ear bud and some water. Im not sure what else you could use that wouldnt damage the sensors. They are very delicate metal bars, just wipe them gently


don't use water... use electrical contact cleaner, comes in a spray can about 8 quid will last years or you can do a group clean...lol


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 1 guest