switch from open pod back to original air box.......

[hansc]

guys,

i am planning to switch back from my current blitz open pod filter to the original filter box settings.......

any problems that will occur and any precautions that i should take?

[Dan]

id just reset the ECU give the MAF sensor a cleaning and clean the throttle body valve area. It will be so much quieter to drive too!

[Mr. Tezza]

Like dan said reset the ecu anyway, cleaning the sensor prob wudn't do any harm either

[hansc]

btw, how do u clean the MAF sensor?

[Dan]

Very carefully!! I just used a small cotton ear bud and some water. Im not sure what else you could use that wouldnt damage the sensors. They are very delicate metal bars, just wipe them gently

[Noel]

Very carefully!! I just used a small cotton ear bud and some water. Im not sure what else you could use that wouldnt damage the sensors. They are very delicate metal bars, just wipe them gently

don't use water... use electrical contact cleaner, comes in a spray can about 8 quid will last years or you can do a group clean...lol