Page 1 of 1

turbo kit is here kind of...

Posted: Wed Aug 03, 2016 7:26 am
by VanCityBeams93
Hey guys so my turbo kit is here but there's a couple of problems . I'm still trying to figure it out with the guy but he screwed me. Still trying to go after him but we will see.
I just finished the exterior and now wanted to turbo my tezza.
Used kit came with:
Greddy td04 turbo and manifold
Downpipe
Intercooler piping and etc
3.8 mm headgasket
550 injectors
Apexi power fc ecu and controller

Problems
Turbo has quite a lot of shaft play even without oil its pretty excessive. Manifold has cracks and holes. And headgasket is used.... I asked the guy multiple times if manifold is good no cracks turbo is good etc etc ... still trying to figure out what to do with it all ..

1.What I'm looking for is a new 3.8 mm headgasket.
2.Also injectors are orange if anyone knows what brand they are.
3. Amy place that sells turbo manifolds. Probs eould cost more to fix this one .?
4. How can I test the power fc in the na beams to make sure it's good.?
Any help is appreciated thanks guys !

Re: turbo kit is here kind of...

Posted: Fri Aug 05, 2016 12:21 am
by xeraptor
1) Are you sure it's 3.8mm head gasket? I've never heard about such thickness. If it is really the case - it's pretty much insane anyway.
Your best bet is to get 1.8mm apexi gasket - http://www.rhdjapan.com/apexi-metal-hea ... 3s-ge.html
2) Orange are probably chinese injectors from ebay
3) Cast iron can be welded, there is no off-the-shelf manifold available for turbo 3s-ge.
4) Just plug it in and start, turbo map will not harm your NA engine.

Re: turbo kit is here kind of...

Posted: Fri Aug 05, 2016 1:59 am
by VanCityBeams93
Thanks so much for that !

Re: turbo kit is here kind of...

Posted: Fri Aug 05, 2016 2:01 am
by VanCityBeams93
I just found out their actually denso injectors !