Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

pas pump bracket info

Post info/questions on engine mods and issues here
User avatar
Tosh21
Altezza Guru
Posts: 521
Joined: Mon Jan 20, 2014 10:12 pm
Location: Oxfordshire

pas pump bracket info

Postby Tosh21 » Wed Jul 29, 2015 9:06 pm

Does anyone happen to have a pas pump bracket off snd could measure some bits for me? Saves me taking it off and re bleeding it all again. I need to know the hole centers for the bracket which bolts to the block and the thread on the banjo fitting in the side of the pump (the feed pipe)

thanks

User avatar
RS Tom-Hundred
Tezza Fanatic!
Posts: 449
Joined: Fri Nov 28, 2014 3:31 pm
Location: Cambridgeshire

Re: pas pump bracket info

Postby RS Tom-Hundred » Thu Jul 30, 2015 10:19 am

Not got mine off the car but you can get the bracket off and the pump off the bracket without having to bleed the system :)

When I had the engine out I removed that and the AC and didnt disconnect either of them. I also painted the brackets to tidy things up while i had them off.

matty
Trc On!
Posts: 33
Joined: Mon Nov 24, 2014 1:47 pm

Re: pas pump bracket info

Postby matty » Thu Jul 30, 2015 6:55 pm

I have one

horizontal width of bracket is 87mm
holes centres at 28mm and 58mm making hole centres at about 32mm
vertical bracket width is 97mm, hole centres at 12mm and 72mm making the centre to centre gap 59mm

hope this makes sense

User avatar
Tosh21
Altezza Guru
Posts: 521
Joined: Mon Jan 20, 2014 10:12 pm
Location: Oxfordshire

Re: pas pump bracket info

Postby Tosh21 » Fri Jul 31, 2015 12:07 am

I've got too many things on my list to do it tbh. The pas relocation is one of those jobs I need to do but I've got so many other more important things to do I keep putting off.
Thanks matty that's exactly what I was after!

User avatar
Tosh21
Altezza Guru
Posts: 521
Joined: Mon Jan 20, 2014 10:12 pm
Location: Oxfordshire

Re: pas pump bracket info

Postby Tosh21 » Tue Aug 04, 2015 10:33 am

Any chance you know the Thread size in the banjo fitting for the pas feed? I need to make an adapter for a -8 hose


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: Bing [Bot] and 2 guests