ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

sxe10 98-01 and 01-05 have different ecu and pinout?

Post info/questions on engine mods and issues here
MKT222
Trc On!
Posts: 30
Joined: Tue Aug 06, 2013 9:18 am

sxe10 98-01 and 01-05 have different ecu and pinout?

Postby MKT222 » Mon Feb 10, 2014 6:26 am

I was wondering why the apexi power fc have 2 different years,1 for the early model 98-01 and the other is 01-05 model....someone is selling me a power fc for the late model 01-05 i dont know if the wiring pinout is different...
Can you guys help me what model i have?
Attachments
Messenger_5837477903023437986_13917631872048035.jpg
Messenger_5837477903023437986_13917631872048035.jpg (160.9 KiB) Viewed 1252 times

xeraptor
Trc Off
Posts: 162
Joined: Tue Jul 26, 2011 1:06 pm

Re: sxe10 98-01 and 01-05 have different ecu and pinout?

Postby xeraptor » Mon Feb 10, 2014 5:48 pm

Coilpacks are different. The rest should be the same.
You would need 02-05 coilpacks to start the car with 02-05 PFC.

MKT222
Trc On!
Posts: 30
Joined: Tue Aug 06, 2013 9:18 am

Re: sxe10 98-01 and 01-05 have different ecu and pinout?

Postby MKT222 » Tue Feb 11, 2014 6:35 am

xeraptor wrote:Coilpacks are different. The rest should be the same.
You would need 02-05 coilpacks to start the car with 02-05 PFC.

Ok thanks a bunch....the wiring is all the same? Even if the kouki model has the center rpm on the cluster?

User avatar
mlcoolj
Altezza Guru
Posts: 1740
Joined: Tue Oct 20, 2009 8:14 pm

Re: sxe10 98-01 and 01-05 have different ecu and pinout?

Postby mlcoolj » Tue Feb 11, 2014 7:13 am

wiring of the cluster should be all the same except for the lightning of the cluster...
Image

MKT222
Trc On!
Posts: 30
Joined: Tue Aug 06, 2013 9:18 am

Re: sxe10 98-01 and 01-05 have different ecu and pinout?

Postby MKT222 » Tue Feb 11, 2014 6:28 pm

90919-02236 = gen1 coils
90919-02239 = later model coils
Will the new coils work without re-wiring or re-pinning the terminals?
...sorry to ask again,i just want to be very sure before i purchase the power fc...
If i will use the later model power fc\oem ecu,i will just need to replace the old coils with 90919-02239,and its good to go?

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: sxe10 98-01 and 01-05 have different ecu and pinout?

Postby tomo » Thu Feb 13, 2014 6:08 pm

I thought they were a bit more different but not too sure, I just made sure I bought the right Pfc when I got mine. Somewhere on site is ecu pinouts, can't renember where tho.
Image


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 1 guest