ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

IS200 ali rad on RS200

Post info/questions on engine mods and issues here
Trc Off
Posts: 85
Joined: Sun May 26, 2013 6:50 pm

IS200 ali rad on RS200

Postby cammygrieve » Wed Nov 27, 2013 11:40 am

Anyone done this before? Easy to do?

User avatar
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: IS200 ali rad on RS200

Postby tomo » Thu Nov 28, 2013 11:38 pm

Is200 radiator won't work, the hoses are in completely wrong place. I think nick the site trader on here might be able to do you an ally rad for an altezza, send him an email.

User avatar
Altezza Guru
Posts: 1768
Joined: Mon Feb 07, 2011 12:32 pm
Location: Llanidloes

Re: IS200 ali rad on RS200

Postby mike_01 » Fri Nov 29, 2013 10:23 am

easy enough to fit just need to make up a hose to the bottom one which isn't in the middle it's more towards the drivers side, could either get someone to move the outlet position and blank the old one off would be the easier and cleaner option as long as there is room but looking at them there seems to be, use very flexible hose or make one up yourself I'm planning on getting one once I get an alli auto rad or oil cooler to suit the gearbox still works out cheaper than buying a specific radiator and there identical except for the outlet position

Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 2 guests