ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

power steering pump replacement

Post info/questions on engine mods and issues here
User avatar
Irish_Al
Noob!
Posts: 21
Joined: Wed Jun 19, 2013 2:55 am

power steering pump replacement

Postby Irish_Al » Wed Jun 19, 2013 3:32 pm

Ok as already mentioned in my welcome thread I need to replace the power steering pump in the car.
Previous owner took the belt off and when I checked I am missing 2 pulleys that I am aware of.
Power steering pump pulley and the tensioner pulley.

My question for the experts is has anybody got a link to the blueprint of a yamaha beams engine so I can check if there is anything else missing.

Thanks in advance
Alan

Image

Image
Last edited by Irish_Al on Mon Jul 08, 2013 12:23 am, edited 2 times in total.
Image

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: power steering pump replacement

Postby peter0991 » Wed Jun 19, 2013 4:36 pm

Ive never seen a blueprint as such. Your best bet will be a manual, but let me know when you find one :lol: Id send you a picture of my setup but I dont have an air con compressor, so it wont be as applicable :oops:

No aircon pulley or tensioner in the picture below.
Image

But in theory the tensioner and the powersteering pulley is all that can be missing.

Throw a picture up on here mate.
Image

User avatar
poTTa
Altezza Guru
Posts: 672
Joined: Fri May 20, 2011 2:49 pm
Location: Barbados

Re: power steering pump replacement

Postby poTTa » Wed Jun 19, 2013 6:18 pm

Log on to http://www.toyodiy.com sign up and select your vehicle...very easy...There are basic schematics and diagrams for every part on your vehicle

I also downloaded a 3sge engine manual...just search for it with Google...
http://www.2shared.com/document/8Tpkfrfr/3SGE_3SGTE_5SFE_ENGINE_REPAIR_.html

And so on...
2004 RS200 Z

Image

User avatar
stabby
Trc On!
Posts: 32
Joined: Wed Jun 20, 2012 2:37 pm
Location: Curacao

Re: power steering pump replacement

Postby stabby » Thu Jun 20, 2013 5:18 pm

hey peter0991,

what size belt did u use to use just the powersteering?
may be interested to do this in the future....
1999 Altezza RS200-Z

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: power steering pump replacement

Postby peter0991 » Thu Jun 20, 2013 11:29 pm

The number 1054 comes to mind :? But I will have to double check tomorrow. I got a piece of string and put it around both pulleys and then measured its length.
Image

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: power steering pump replacement

Postby peter0991 » Thu Jun 20, 2013 11:30 pm

poTTa wrote:Log on to http://www.toyodiy.com sign up and select your vehicle...very easy...There are basic schematics and diagrams for every part on your vehicle

I also downloaded a 3sge engine manual...just search for it with Google...
http://www.2shared.com/document/8Tpkfrfr/3SGE_3SGTE_5SFE_ENGINE_REPAIR_.html

And so on...


^^ Oh, would you look at that! Thats gonna come in handy :lol:
Image

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: power steering pump replacement

Postby peter0991 » Sat Jun 22, 2013 8:44 pm

Belt length is 1080
Image

User avatar
stabby
Trc On!
Posts: 32
Joined: Wed Jun 20, 2012 2:37 pm
Location: Curacao

Re: power steering pump replacement

Postby stabby » Sun Jun 23, 2013 1:52 pm

Thanks alot peter0991..
1999 Altezza RS200-Z

User avatar
Irish_Al
Noob!
Posts: 21
Joined: Wed Jun 19, 2013 2:55 am

Re: power steering pump replacement

Postby Irish_Al » Mon Jul 01, 2013 12:44 am

Still no closer to getting this sorted.
First post updated with photos.

Would really appreciate if one of you guys could take a photo for me to compare.
Image

User avatar
poTTa
Altezza Guru
Posts: 672
Joined: Fri May 20, 2011 2:49 pm
Location: Barbados

Re: power steering pump replacement

Postby poTTa » Mon Jul 01, 2013 2:51 am

I can't see the pics...

Here's a pic I pulled from google

Image

It's not going to get better than this...all of the pulleys are there...
2004 RS200 Z

Image


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 1 guest