Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

What parts needed to replace clutch?

Post info/questions on engine mods and issues here
User avatar
stabby
Trc On!
Posts: 32
Joined: Wed Jun 20, 2012 2:37 pm
Location: Curacao

What parts needed to replace clutch?

Postby stabby » Mon May 27, 2013 3:35 pm

Blessed week to you all.

I'm planning to change my clutch in about a month or so and wanted to gather some information before making a final order.

Ofcourse that parts that would need to be replaced are the clutch, clutch cover and the flywheel?
Not too sure about the flywheel, but if needed would it be better going lightweight or sticking with the dual mass?
Clutch disc and clutch cover can remain oem.

Also needed would be the clutch release bearing (to get rid of some of the noise :) ) and the spigot bearing?
And what about the 8 screws that attacht to the flywheel?
Any input, advice or suggestions appreciated on what would be needed.
Some links or info on where to buy also
1999 Altezza RS200-Z

User avatar
poTTa
Altezza Guru
Posts: 672
Joined: Fri May 20, 2011 2:49 pm
Location: Barbados

Re: What parts needed to replace clutch?

Postby poTTa » Mon May 27, 2013 4:02 pm

Yeh Stabby...

I recently changed my press. plate, clutch, flywheel, spigot bearing, release bearing, flywheel bolts, rear engine oil seal, clutch master and slave cylinders, DOT 4 fluid.

The clutch i got from Nick is an Exedy HD Clutch Kit
Part Number - TYK7378HD

Image

and a JUN Lightweight Flywheel - 6.4kg
Part number - 2001M-T030
This flywheels comes with bolts as the OEM bolts are too long.

http://www.rhdjapan.com/jun-auto-lightweight-flywheel-sxe10-altezza-55531

I have it in 2 weeks now and its great...engine revs much faster up and down and the clutch grips very very well...
2004 RS200 Z

Image

User avatar
stabby
Trc On!
Posts: 32
Joined: Wed Jun 20, 2012 2:37 pm
Location: Curacao

Re: What parts needed to replace clutch?

Postby stabby » Mon May 27, 2013 6:40 pm

Hello poTTa, thanks for the information.
Some more questions came to mind..

Is the Exedy HD kit somewhat similar to the oem one? does it require more pedal pressure..smooth driving?
With all the changed parts do you still hear the squealing and chirping from the transmission?
And do you know the part numbers for the spigot bearing and rear engine oil seal? can't seem to find it on toyodiy...

The master and slave cylinders are also necessary or just optional?..mine isn't leaking (yet) and hopefully stays that way :)
1999 Altezza RS200-Z

User avatar
poTTa
Altezza Guru
Posts: 672
Joined: Fri May 20, 2011 2:49 pm
Location: Barbados

Re: What parts needed to replace clutch?

Postby poTTa » Mon May 27, 2013 7:05 pm

That Exedy clutch kit i have is just a stronger pressure plate (one level above oem). However the pedal is softer than oem now, i don't know how that happen. :lol:

I changed the release bearing with a genuine oem and the chirping is still there... :lol: ...i've accepted it as a disease that all Altezzas have.

The master and slave cylinder replacements are optional...

And you should be able to find all of the part numbers on Toyodiy...did you register selected your car?

This is mine, not necessarily yours...
Image
2004 RS200 Z

Image

User avatar
stabby
Trc On!
Posts: 32
Joined: Wed Jun 20, 2012 2:37 pm
Location: Curacao

Re: What parts needed to replace clutch?

Postby stabby » Mon May 27, 2013 7:40 pm

Haha..yeah that chirping is really annoying..especially in the morning..
And normally I just go to the site and select my car from the lists that they have (japan, 1999, altezza, sxe10 etc etc)
So the clutch release bearing is: 31230-53010, spigot bearing: ?, rear engine seal oil: 90363-12004?
1999 Altezza RS200-Z

User avatar
Evelyn
Moderator
Posts: 6062
Joined: Mon Sep 10, 2007 9:06 pm
Location: Galway
Contact:

Re: What parts needed to replace clutch?

Postby Evelyn » Tue May 28, 2013 12:58 pm

If you going doing the flywheel dont forget flywheel bolts. Sorry should have said if you need the rear engine oil seal you would know by know it would be leaking
Image

User avatar
stabby
Trc On!
Posts: 32
Joined: Wed Jun 20, 2012 2:37 pm
Location: Curacao

Re: What parts needed to replace clutch?

Postby stabby » Fri May 31, 2013 2:28 pm

ok thanks for the info Evelyn.
The part number for this is: 90105-12312.

I think I'll be going with this setup. But not for now. Just wanted to gather some info before making my purchase in about a month or two.

Thanks for all and will keep you posted once I have the items.
1999 Altezza RS200-Z


Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 4 guests