ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

stevo_D's lex 200

Once you've introduced yourself why not throw up a few pictures of your car or a project thread?
stevo_d
Trc On!
Posts: 39
Joined: Sun Aug 07, 2011 10:56 am

stevo_D's lex 200

Postby stevo_d » Mon Sep 12, 2011 2:34 pm

hi guys recently joined up for heres how far ive got with my is200 so far

firstly bought some volk GTP splits 18x9 et 24 all way around
Image
Image

they poke to much so im going to have get stretch tyres and coilovers with camber adjustable top mounts to tuck em in so there off for now

next i have got from jayo on here a 5zigen border 304 exhaust which make it sound like a honda but i dont mind it

Image
Image
Image


http://www.vimeo.com/28929280


next plans are a clutch as shes started slipping

but tuning wise

coilovers
HIDS
lip kit
front and rear braces
stretch tyres and get the volks ok
jap size plates
intake kit

then if i get bored ill look at a FI set up

cheers for reading updates soon i hope

User avatar
Damok
Moderator
Posts: 5111
Joined: Fri Apr 18, 2008 7:08 pm

Re: stevo_D's lex 200

Postby Damok » Mon Sep 12, 2011 2:40 pm

looks good :wink:
Newbie click the link, $ $ $ $ $
http://www.albinoblacksheep.com/flash/posting

jayo
Trc Off
Posts: 181
Joined: Wed Aug 11, 2010 11:56 pm

Re: stevo_D's lex 200

Postby jayo » Thu Sep 15, 2011 10:40 pm

nice looking car,exhasut sounds totally different on your car!!
i taught it would be much the same as the tezz??
you happy with your honda :lol:

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: stevo_D's lex 200

Postby tomo » Thu Sep 15, 2011 11:26 pm

Looks good mate

then if i get bored ill look at a FI set up

cheers for reading updates soon i hope


Building a forged engine for a freinds turbo one at moment, was very quick (340bhp) before it went bang.
Image

stevo_d
Trc On!
Posts: 39
Joined: Sun Aug 07, 2011 10:56 am

Re: stevo_D's lex 200

Postby stevo_d » Fri Sep 16, 2011 1:07 am

jayo wrote:nice looking car,exhasut sounds totally different on your car!!
i taught it would be much the same as the tezz??
you happy with your honda :lol:


how did it sound on a tezza then?

User avatar
P.D.87RWD
Altezza Guru
Posts: 1052
Joined: Tue Mar 24, 2009 6:50 pm
Location: Leitrim
Contact:

Re: stevo_D's lex 200

Postby P.D.87RWD » Fri Sep 16, 2011 12:14 pm

looking good..

User avatar
Noel
Moderator
Posts: 3732
Joined: Sat Mar 03, 2007 6:18 pm
Location: oldville

Re: stevo_D's lex 200

Postby Noel » Fri Sep 16, 2011 12:19 pm

stevo_d wrote:they poke to much so im going to have get stretch tyres and coilovers with camber adjustable top mounts to tuck em in so there off for now


Hi

Coilovers with adjustable top mounts for camber won't work with altezza's, the Altezza has a top wishbone so if you need to "tuck in" the top you'll need adjustable top wishbones, there are a few different types out there but most people find as you drop the height the wheels "tuck in" anyway... and usually too much, as inner tyre wear is very common...

HTH

cheers
Noel

User avatar
Hoods
Trc Off
Posts: 102
Joined: Sun Mar 06, 2011 9:10 am
Location: Glasgow
Contact:

Re: stevo_D's lex 200

Postby Hoods » Fri Sep 16, 2011 2:21 pm

They don't poke to much they look perfect :) but as you said run a thinner tyre and get it droped. I have mine prity low and I have -1.30 degrease of camber. That's after its had the alignment done lol was about -1.80 before.

Car looks sweet and wheels are noice!
Image

User avatar
d2carazy
Clare rep
Posts: 2738
Joined: Thu Apr 24, 2008 9:49 am
Location: Ennis, Clare, Ireland
Contact:

Re: stevo_D's lex 200

Postby d2carazy » Fri Sep 16, 2011 7:43 pm

best of luck with it :wink:

stevo_d
Trc On!
Posts: 39
Joined: Sun Aug 07, 2011 10:56 am

Re: stevo_D's lex 200

Postby stevo_d » Fri Sep 16, 2011 10:09 pm

Hoods wrote:They don't poke to much they look perfect :) but as you said run a thinner tyre and get it droped. I have mine prity low and I have -1.30 degrease of camber. That's after its had the alignment done lol was about -1.80 before.

Car looks sweet and wheels are noice!


fronts poke about 40mm and rears about 20mm

User avatar
Robin H
Southern England Rep
Posts: 2356
Joined: Sun Mar 18, 2007 10:23 pm
Location: Dorset
Contact:

Re: stevo_D's lex 200

Postby Robin H » Tue Sep 20, 2011 7:27 pm

look forward to see the rims fitted :wink:
Deals on Anodised Altezza parts.... cooling panels and battery bars..
Image

If you are a UK member and interested in club meets please sign up here:
viewtopic.php?f=6&t=7729


Please Support TezzaWorld
viewtopic.php?f=2&t=8309


Club stickers
viewtopic.php?f=16&t=8724

Blitz Turbo Altezza RS220
Image
I wish I had more time.....


Return to “Member's Cars / Projects”

Who is online

Users browsing this forum: No registered users and 1 guest