Page 1 of 1

Altezza RS200 Engine Trouble

Posted: Thu Oct 29, 2015 10:33 pm
by Bluevince
Hello,

So as you can tell from my subject, I am having some engine troubles, Basically cylinder 1 and 2 are working fine while 3 and 4 are not. we swapped the first two cylinder coils with 3 and 4 to see if that would change anything, but it was still the 1 and 2 that worked and 3 and 4 did not spark or anything, we thought that maybe it was the coils but that did not seem to be the issue, put new plugs in because the old ones were well....old, however that did not immediately solve the issue, still did not work for about half an hour, then it just started working, ran four two days then quit again, with the issue being the same as before.
Anybody have anything similar to this?? or if you have an idea as what it might be, it would be gratefully accepted.

Thank you

Re: Altezza RS200 Engine Trouble

Posted: Sat Nov 07, 2015 12:02 pm
by SilTezza
first this post should be in altezza section problem with your tezz or engine section.. about your engine try compression test on every cylinder..

Re: Altezza RS200 Engine Trouble

Posted: Sun Nov 15, 2015 10:59 pm
by Bluevince
Hey, sorry about that. Fixed the problem, the ground wire for the front two cylinders had broken off, just had to reconnect for a very easy fix.