Page 2 of 3

Re: ITCC ALTEZZA Build

Posted: Thu Feb 21, 2013 10:37 pm
by tezzasligo
nice car could dat ecu work on a beams engine?
and if so would u sell it?

Re: ITCC ALTEZZA Build

Posted: Fri Feb 22, 2013 2:53 pm
by THE BOM3
tezzasligo wrote:nice car could dat ecu work on a beams engine?
and if so would u sell it?


That is one of the best ecu's money can buy BUT!! The problem is that you have to have the specific efi tuning lead to map it. I don't have one and without the wiring loom I have your talking £400 sterling for the connector for the ecu. I am selling it but its to a lad to use for a spare for his 307btcc car.

Re: ITCC ALTEZZA Build

Posted: Wed Apr 03, 2013 3:37 pm
by THE BOM3
Progress is slow at the minute not going to make the first round of Itcc unfortunately but what can you do.
Here's a few bits I have to go into the car once its time to go back together

The Full loom
Image

GEMS Dash
Image

Image

Image

Image

Re: ITCC ALTEZZA Build

Posted: Wed May 01, 2013 9:31 pm
by twiglett-RS200
any updates on this?

Re: ITCC ALTEZZA Build

Posted: Thu May 16, 2013 9:15 am
by THE BOM3
twiglett-RS200 wrote:any updates on this?


Yes ;-)

It's been a while since I updated here. There has been a lot of work done over the last month or so and it looking more like a car again! The cage is finished!!! All the work is done by GripFab (John&Brendan Stone) the work is top class as always!!!

Image

Image

Image

Image

Image

Image

Re: ITCC ALTEZZA Build

Posted: Thu May 16, 2013 12:01 pm
by Steve86
Nice Project fella.. cant wait to see how u go about

Re: ITCC ALTEZZA Build

Posted: Thu May 16, 2013 2:43 pm
by IanS200
That is one hell of a project..

Re: ITCC ALTEZZA Build

Posted: Wed May 29, 2013 10:21 am
by THE BOM3
Been doing some more bits over the last few days. Had to move the gear stick back in the car by 180mm so I could change gear when sitting back in the car. So we decided to extend the rod coming out of the box and move the gears tick mounting point back as it would keep the positive feel from the standard s2000 shifter.
Here is the rod we machined to extend the selector rod
Image

And the heartsick mount moved back 180mm

Image

Image

Image

Re: ITCC ALTEZZA Build

Posted: Tue Jun 04, 2013 6:06 pm
by THE BOM3
It's Paint time at last!!! Got everything etch primed today paint will be finished tomorrow.

Image

Image

Image

Re: ITCC ALTEZZA Build

Posted: Wed Jun 12, 2013 8:16 am
by THE BOM3
So I got the car painted inside last week and after a few days baking in the sun it was ready to start putting it back together. Ill up date pics as I go hope to have it ready to go in a month all going well.

Image

Image

Image

Re: ITCC ALTEZZA Build

Posted: Sun Jun 16, 2013 10:18 am
by THE BOM3
Few updates. Rear doors trimmed down and fitted few more kg's saved

Image

Seat fitted

Image

Tilton pedal box fitted
Image

Re: ITCC ALTEZZA Build

Posted: Sun Jun 16, 2013 2:09 pm
by donut46
Cage is a serious piece of kit!! Tilton pedal box looks like a tasty piece of it too, great build

Re: ITCC ALTEZZA Build

Posted: Mon Jun 17, 2013 4:05 pm
by THE BOM3
Front subframe finished and rack mounted up

Image

Image

Re: ITCC ALTEZZA Build

Posted: Mon Jun 17, 2013 8:04 pm
by ISred02
donut46 wrote:Cage is a serious piece of kit!! Tilton pedal box looks like a tasty piece of it too, great build


X2 8)

Re: ITCC ALTEZZA Build

Posted: Mon Jul 01, 2013 9:48 pm
by THE BOM3
More progress steering colum in and connected up


Image


Image

Image

Image

Tilton pedal box bolted in and plumbed up

Image

Image

New discs and reconditioned calipers

Image