Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Once you've introduced yourself why not throw up a few pictures of your car or a project thread?
User avatar
NinjaPower
Trc Off
Posts: 84
Joined: Sun Jan 13, 2013 12:38 am
Location: Surrey UK

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby NinjaPower » Fri Apr 19, 2013 7:10 pm

Been a while since iv been on here to update my build thread.. So got some updates for you..

Tension rods with SuperPro offset Bushes..

Image


30 Row Oil Cooler & Filter Relocation Kit... From AutoExtreme.co.uk

Image


Haltec Sprint 500 Platnum ECU.. Got new Inlet Temp sensor, Water Temp sensor, and a 3 Bar MAP sensor to replace the 20yr old sensors.

Image

User avatar
NinjaPower
Trc Off
Posts: 84
Joined: Sun Jan 13, 2013 12:38 am
Location: Surrey UK

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby NinjaPower » Fri Apr 19, 2013 7:19 pm

RollCage by Nickson Motorsport.. 6 point bolt in, single door bars, diagonal rear bar, and harness bar.

Image


Manifold with HKS GTll 60mm Wastegate..

Image


Instrument Panel, TRD Gearknob, AEM AFR Gauge hiding down the bottom too..

Image

User avatar
NinjaPower
Trc Off
Posts: 84
Joined: Sun Jan 13, 2013 12:38 am
Location: Surrey UK

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby NinjaPower » Fri Apr 19, 2013 7:31 pm

Holset HX35.. My friend Craig spent about 15hrs polishing the inlet housing.. Looks awesome..

Image


Finally some pics now she has been painted..

Image

Image

Image

Image

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby tomo » Sat Apr 20, 2013 12:04 am

Looking good mate, gonna be a weapon, are those solid diff bushes in the 2nd pic too.
Image

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby peter0991 » Sat Apr 20, 2013 10:57 pm

NinjaPower wrote:Been a while since iv been on here to update my build thread.. So got some updates for you..

Tension rods with SuperPro offset Bushes..

Image




That looks like the standard super pro bush... I thought the offset ones would be more....well....offset :lol:
Image

User avatar
NinjaPower
Trc Off
Posts: 84
Joined: Sun Jan 13, 2013 12:38 am
Location: Surrey UK

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby NinjaPower » Mon Apr 22, 2013 12:24 am

tomo wrote:Looking good mate, gonna be a weapon, are those solid diff bushes in the 2nd pic too.


In the oil cooler picture? They are the take-off & relocation plates..

User avatar
NinjaPower
Trc Off
Posts: 84
Joined: Sun Jan 13, 2013 12:38 am
Location: Surrey UK

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby NinjaPower » Mon Apr 22, 2013 12:29 am

peter0991 wrote:
That looks like the standard super pro bush... I thought the offset ones would be more....well....offset :lol:


Just the angle..lol
They are defiantly offset ones.. There is only a certain amount they can go from centre.. The outer ring of the SuperPro bush is thicker that stock ones.. The tube is about 4-5mm away from the inside of the outer ring, so any further over and it won't have enough poly material around the tube.

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby tomo » Mon Apr 22, 2013 1:12 pm

NinjaPower wrote:
tomo wrote:Looking good mate, gonna be a weapon, are those solid diff bushes in the 2nd pic too.


In the oil cooler picture? They are the take-off & relocation plates..


My bad so it is lol.
Image

User avatar
NinjaPower
Trc Off
Posts: 84
Joined: Sun Jan 13, 2013 12:38 am
Location: Surrey UK

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby NinjaPower » Sat May 11, 2013 10:57 pm

Finally fitted for good..

Image

Image

Image


Also fitted my Haltech 3Bar MAP Sensor..

Image

THE BOM3
Trc On!
Posts: 51
Joined: Sun Jun 21, 2009 12:03 pm

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby THE BOM3 » Thu May 30, 2013 2:37 pm

Please tell me you don't run that number plate while your drifting?? You go buy a big oil cooler big inter cooler and a big rad and block it with a number plate

Steve86
Tezza Fanatic!
Posts: 285
Joined: Tue Jul 31, 2012 3:03 pm
Location: Southern Africa

Re: NinjaPower: Altezza Drift - BDC 2013 - 500hp 1JZ

Postby Steve86 » Fri May 31, 2013 11:15 am

Some 'Rocket Science' done here.. Good Job NinjaPower.
I'm in the White House


Return to “Member's Cars / Projects”

Who is online

Users browsing this forum: No registered users and 1 guest