Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

My daily ride with a 1JZ

Once you've introduced yourself why not throw up a few pictures of your car or a project thread?
User avatar
wullie_trd
Altezza Guru
Posts: 1061
Joined: Wed Sep 08, 2010 9:51 pm
Location: Dunfermline, Scotland

Re: My daily ride with a 1JZ

Postby wullie_trd » Mon Apr 22, 2013 6:54 pm

Lovely!

Looked better with the black headlights though in my opinion.

Top work though!
Image

User avatar
neilis200
Trc Off
Posts: 178
Joined: Wed Feb 06, 2013 12:31 pm
Location: clare/limerick

Re: My daily ride with a 1JZ

Postby neilis200 » Mon Apr 22, 2013 8:15 pm

serious looking wagon
If the cross is empty. proceed with caution

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Tue Apr 23, 2013 8:56 am

wullie_trd wrote:Lovely!

Looked better with the black headlights though in my opinion.

Top work though!


Black headlight are too old....hard to maintain, have to sent for polish every now & then. Just keeping in clean & tidy.

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: My daily ride with a 1JZ

Postby tomo » Tue Apr 23, 2013 11:30 am

Looking good, I like what you have done with the sat nav unit. The wheels look good, what size are they?
Image

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Tue Apr 23, 2013 1:15 pm

XXR 527
Front 17 x 8.25J +30, add another 10mm spacer coz I over rolled my fender too much.
Rear 17 x 9.75J+25

ddahc
Noob!
Posts: 5
Joined: Tue Nov 15, 2011 3:59 pm

Re: My daily ride with a 1JZ

Postby ddahc » Tue Apr 23, 2013 8:31 pm

Not sure if its been mentioned, what size is your intercooler? Btw been going thru ur build, and its awesome definitely how i'm looking to have mine turn out.

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Wed Apr 24, 2013 1:38 am

HKS 1303-RA016

Size: 600MM (W) x 300MM (H) x 65MM (THK)
Weight: 5.4 kgs

uthi
Noob!
Posts: 15
Joined: Wed Dec 26, 2012 11:06 pm

Re: My daily ride with a 1JZ

Postby uthi » Wed Aug 21, 2013 6:05 pm

Link to the build up story is not working

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: My daily ride with a 1JZ

Postby peter0991 » Wed Aug 21, 2013 11:13 pm

Aaaaw man! I want a JZ in my life!

So what combination did you use?

Stock subframe, 2jz brackets with 3sge mounts? And that fits in with no modifications?
Image

JordanCoupe
Trc On!
Posts: 54
Joined: Mon Aug 26, 2013 2:27 pm
Location: Kildare, Ireland

Re: My daily ride with a 1JZ

Postby JordanCoupe » Tue Aug 27, 2013 11:36 am

Savage build man was there much custom work needed bar the power steeering set-up?

Deadly little touch with the sat-nav almost looks totally factory

tezza21
Trc On!
Posts: 42
Joined: Mon Aug 26, 2013 11:19 am

Re: My daily ride with a 1JZ

Postby tezza21 » Wed Aug 28, 2013 11:25 am

tjis is some car man very nice would love tho have it

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Mon Jul 21, 2014 3:55 pm

peter0991 wrote:Aaaaw man! I want a JZ in my life!

So what combination did you use?

Stock subframe, 2jz brackets with 3sge mounts? And that fits in with no modifications?


Sorry, for the extremely late reply. Yes stock subframe but with the GXE10 frame not the SXE10. The RS200 subframe is 1 inch thicker than is IS200. And Yes 2JZ bracket with 3SGE mount so u will have a lower engine position, with absolute no modification done, plug & play. But not just any 2JZ bracket, there are few models like the crown, progres, aristo. I can't tell you from which car coz I picked them up from 2JZ NA motor over the chopshop.
Attachments
DSC00504_2.jpg
DSC00504_2.jpg (199.62 KiB) Viewed 1501 times

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: My daily ride with a 1JZ

Postby peter0991 » Tue Jul 29, 2014 9:45 am

Had no idea the GXE and SXE had different subframes. I was gonna use the SXE one. I'll look into that. Lower engine position would be good. NA 2JZ brackets must have been from an IS300.

Also, where did the shifter from the R154 end up? Did you have to extend it? What propshaft did you use to connect the box to the diff?
Image

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Mon Aug 11, 2014 12:05 am

peter0991 wrote:Had no idea the GXE and SXE had different subframes. I was gonna use the SXE one. I'll look into that. Lower engine position would be good. NA 2JZ brackets must have been from an IS300.

Also, where did the shifter from the R154 end up? Did you have to extend it? What propshaft did you use to connect the box to the diff?


GXE crossmember is around 1 inch thinner than the SXE. As for the brackets, u need to mix & match. I'm not sure about the IS300 as my country do not have IS300. Like I mention, I dont have any idea which chassis they are from, I took it off from a hill of 2JZ NA.

For the R154, I didn't any extension. I bend the shifter to centered the shifter. I did it when I bought a shorty from japan auction. If u need one, let me know. I did a copy of it.

Propshaft? u mean long shaft, I cut & paste the jzx100 then balance it. Some say the sxe10 MT 6spd just fit rite in, but it couldnt fit into mine, maybe i got my engine position to far to the rear. My long shaft is 3 inch shorter then the sxe10 MT.
Attachments
DSC_0191 (a).jpg
DSC_0191 (a).jpg (138.57 KiB) Viewed 1452 times
DSC05819a.jpg
DSC05819a.jpg (180.42 KiB) Viewed 1452 times

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Sat Feb 07, 2015 7:35 pm

New updates!

- Quantum coilovers kit F:20k R:12k
- PTP turbo Blanket
- HKS GT3040
- HKS Super Hybrid Filter
- HKS 50mm Wastegate
- HKS SQV BOV
- HKS intercooler
- Power Enterprise 550cc injectors
- Apexi Power FC
- Fluidampr crank pulley
- BuddyClub Spec III Style Titanium Muffler (head to toe 7kgs)
- AP Racing 6 Pot CP5555
- Ogura Triple Plate 1000F
- APP brake lines
- Nardi Classic Wheels
Attachments
DSC05840s.jpg
DSC05840s.jpg (152.68 KiB) Viewed 1253 times
engine bay ptp.jpg
engine bay ptp.jpg (218.55 KiB) Viewed 1254 times
parts.jpg
parts.jpg (177.96 KiB) Viewed 1255 times


Return to “Member's Cars / Projects”

Who is online

Users browsing this forum: No registered users and 2 guests