Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

My daily ride with a 1JZ

Once you've introduced yourself why not throw up a few pictures of your car or a project thread?
User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

My daily ride with a 1JZ

Postby iCon » Sat Nov 10, 2012 10:09 am

Took me around 8 months to fully built up this daily ride of mine. But it took me about a year to study (R&D) what I want. Here's my specification:

Engine:
- 1JZ-GTE vvti from JZX100- Lighten & balanced pullies (Crank, water, steering, alternator & tensional) Total 1.7kg
- GXE-10 crossmember
- 2JZ Engine brackets
- TRD 3S-GE Engine mounting
- R154 manual transmission
- Custom power steering piping
- Forged racing radiator
- Samco radiator hose (Black)
- KNN air filter
- Synapse Engineering Synchronic BOV
- HKS intercooler
- 2 1/2" intercooler custom fully SUS304 piping
- Full Trilion (Black) Piping sockets
- Zees Twin Exhaust with fully SUS304 custom 3' piping head to toe
- Walbro 255 fuel pump
- NTCL 68° Low Temp Thermostat
- SPAL Performance fan

Footwork & Transmission:
- XXR 527 17” Front 8.25J +30 Rear 9.75J +25
- Cusco Radiator cooling panel
- Cusco Zero-2E Coilover kit
- Cusco E-CON Suspension Controller kit
- Cusco Front adjustable member reinforcement rod bar
- Cusco Front Negative Camber Arms
- Cusco Front 3 point strut bar
- Cusco Front lower arm bar V2
- Cusco Rear lower arm bar V2
- Cusco Rear lower arm bar V1 (J bar)
- Cusco Front anti roll bar
- Cusco Rear anti roll bar
- Cusco Rear 3 point strut brace
- Cusco Rear Trunk Bar
- Cusco 1.5 way LSD wt 4.1 final
- Cusco Exedy Super Single
- Custom R154 short shifter
- Custom RCA - Roll Center Adjuster
- Custom rose joint front caster arms
- Custom teflon front lower arms
- Custom bushing tie rod for extra turn ratio
- Custom adjustable rear axle rod
- Custom adjustable rear lower link
- WELD semi rigid diffential mounts
- LS400 4 Pot front calipers with Endless pads 330mm rotor
- Goodridge brake lines

Interior & Electronics:
- Kouki model Carbon steering
- Toyota NHZA-W58G HDD double din wt bluetooth
- ARK Design MFD meter display
- ARK Advance Boost Controler
- ARK Design STB timer
- Billion VFC-Pro DD Fan Controller

Exterior:
- Eleven Nines Motorsport CF front hood
- Zenki Grill
- Kouki model smoke tail lights
- PIAA HID 6400K
- Stock bodykit with Neo bumper
- AkzoNobel Sikken Flat White

ELEGANT comes from hard work....
Attachments
DSC00197.JPG
DSC00197.JPG (86.37 KiB) Viewed 3994 times
DSC00049a.jpg
DSC00049a.jpg (210.69 KiB) Viewed 3994 times
DSC06479a.jpg
DSC06479a.jpg (68.67 KiB) Viewed 3994 times
Last edited by iCon on Mon Apr 22, 2013 5:07 pm, edited 5 times in total.

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: JZX10 from Malaysia

Postby iCon » Sat Nov 10, 2012 10:11 am

And here is a story of how I built it.
http://www.facebook.com/media/set/?set= ... 494&type=3

Video:
http://www.facebook.com/photo.php?v=101 ... =3&theater

Dyno:
http://www.facebook.com/video/video.php ... 2947224495
268whp stock ECU, stock boost 0.7bar, stock Turbo. No plans for upgrades due to daily drive car.
Last edited by iCon on Sat Nov 10, 2012 3:13 pm, edited 1 time in total.

User avatar
mlcoolj
Altezza Guru
Posts: 1740
Joined: Tue Oct 20, 2009 8:14 pm

Re: JZX10 from Malaysia

Postby mlcoolj » Sat Nov 10, 2012 10:53 am

very nice! gonna check the story now :P
Image

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: JZX10 from Malaysia

Postby tomo » Sat Nov 10, 2012 11:03 am

Good work, looks good
Image

User avatar
murphman07
Tezza Fanatic!
Posts: 388
Joined: Thu May 06, 2010 11:18 am
Location: Kerry

Re: JZX10 from Malaysia

Postby murphman07 » Sat Nov 10, 2012 12:03 pm

Very nice!! crazy list of modifications!!
All factory extra's Garda, I swear!

User avatar
tezza mick
Altezza Guru
Posts: 922
Joined: Tue Mar 09, 2010 3:39 am
Location: galway

Re: JZX10 from Malaysia

Postby tezza mick » Sun Nov 11, 2012 3:07 am

wow :mrgreen: fantastic work 8)

User avatar
G-TECroscommon
Altezza Guru
Posts: 754
Joined: Tue Feb 23, 2010 10:07 pm
Location: Roscommon
Contact:

Re: JZX10 from Malaysia

Postby G-TECroscommon » Sun Nov 11, 2012 3:35 am

looking well alvin! how did you get the AC lights white ? 8)
Image

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: JZX10 from Malaysia

Postby iCon » Sun Nov 11, 2012 5:06 am

Do not buy any LEDs from ebay. Waste of time & money.
What I did was solder more LED connecting to the main ones all around the rings.
Sorry I don't have any pictures the modification guide through (forgotten about it while doing it).
Attachments
DSC06384a.jpg
DSC06384a.jpg (57.13 KiB) Viewed 3951 times

User avatar
G-TECroscommon
Altezza Guru
Posts: 754
Joined: Tue Feb 23, 2010 10:07 pm
Location: Roscommon
Contact:

Re: JZX10 from Malaysia

Postby G-TECroscommon » Sun Nov 11, 2012 6:35 pm

That's cool! I might have a go myself one of these days!
Image

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: JZX10 from Malaysia

Postby iCon » Sun Nov 11, 2012 7:25 pm

Just go it man, it really put on a smile every time you drive at night. Frens just can't believe that panel & cluster are from a 13 years old car.

User avatar
tomo
Altezza Guru
Posts: 1127
Joined: Fri Jul 17, 2009 3:10 pm
Location: Poole, Dorset

Re: JZX10 from Malaysia

Postby tomo » Sun Nov 11, 2012 11:18 pm

What size bulbs are they? Normal sized capless 501 bulbs?
Image

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: JZX10 from Malaysia

Postby iCon » Mon Nov 12, 2012 3:50 am

The bulbs are from the T5, not the 501 bulbs. Please correct me if i'm wrong.
Remove the bulbs from the T5 socket, solder the LEDs connecting the + & - from T5 socket. Connect them all around the rings. That's about it.

It would be easier if I have the pictures, but unfortunately I totally forgotten to snap some pic while I was doing it.

Tezza-Shea
Tezza Fanatic!
Posts: 208
Joined: Thu Jun 28, 2012 9:39 am

Re: JZX10 from Malaysia

Postby Tezza-Shea » Sun Nov 18, 2012 7:04 pm

what a car :o

User avatar
ISred02
Altezza Guru
Posts: 553
Joined: Fri Sep 09, 2011 10:10 am
Location: Laois

Re: JZX10 from Malaysia

Postby ISred02 » Sun Nov 18, 2012 9:02 pm

Fookin sweet dude,great work 8)
CF vortex generator,eurou eyelids,angle eyes with black headlights,17" gun grey gtr replica alloys,LEDs.
Mission: Supercharged!

User avatar
iCon
Trc On!
Posts: 43
Joined: Fri Nov 26, 2010 2:43 am
Location: Malaysia
Contact:

Re: My daily ride with a 1JZ

Postby iCon » Mon Apr 22, 2013 5:06 pm

New wheels
Attachments
DSC00322_zps0ed09e89.jpg
DSC00322_zps0ed09e89.jpg (67.09 KiB) Viewed 2041 times
DSC00303_zps79312528.jpg
DSC00303_zps79312528.jpg (55.94 KiB) Viewed 2041 times
DSC00369_zpsd80f30a8.jpg
DSC00369_zpsd80f30a8.jpg (35.65 KiB) Viewed 2041 times
Last edited by iCon on Sat Feb 07, 2015 7:56 pm, edited 1 time in total.


Return to “Member's Cars / Projects”

Who is online

Users browsing this forum: No registered users and 2 guests