Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

Minty.Fresh BN Sports Altezza

Once you've introduced yourself why not throw up a few pictures of your car or a project thread?
User avatar
G-TECroscommon
Altezza Guru
Posts: 754
Joined: Tue Feb 23, 2010 10:07 pm
Location: Roscommon
Contact:

Re: Minty.Fresh BN Sports Altezza

Postby G-TECroscommon » Wed Jan 07, 2015 2:44 pm

That's an insane job dude fair play to you!
Image

twiglett-RS200
Tezza Fanatic!
Posts: 432
Joined: Wed Aug 17, 2011 1:57 pm

Re: Minty.Fresh BN Sports Altezza

Postby twiglett-RS200 » Wed Jan 07, 2015 10:55 pm

how come you kept the abs actuator?
surely it would have been the perfect time to ditch it.

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: Minty.Fresh BN Sports Altezza

Postby peter0991 » Wed Jan 21, 2015 2:44 pm

I really could not be bothered to take on that task as well. Got enough on my hands as it is and I wanted to actually drive the car this year :lol:
Image

User avatar
G-TECroscommon
Altezza Guru
Posts: 754
Joined: Tue Feb 23, 2010 10:07 pm
Location: Roscommon
Contact:

Re: Minty.Fresh BN Sports Altezza

Postby G-TECroscommon » Thu Jan 22, 2015 4:26 pm

Image
a big change from when it was in ireland
Image

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: Minty.Fresh BN Sports Altezza

Postby peter0991 » Fri Jan 23, 2015 8:12 am

Haha! Yea, you could say that :lol:

Image

Still got those Irish plates in my room
Image

User avatar
Gojira san
Trc On!
Posts: 57
Joined: Fri Jan 09, 2015 3:04 pm
Location: Japan

Re: Minty.Fresh BN Sports Altezza

Postby Gojira san » Fri Jan 23, 2015 11:24 am

still looks hawt!

User avatar
RS Tom-Hundred
Tezza Fanatic!
Posts: 449
Joined: Fri Nov 28, 2014 3:31 pm
Location: Cambridgeshire

Re: Minty.Fresh BN Sports Altezza

Postby RS Tom-Hundred » Fri Jan 23, 2015 5:58 pm

Agreed! :)

Damn, I wish I could find one of those red Altezza badges at a reasonable cost! Annoying that you can get nearly any badge on ebay/from China for less than £10 but not one of those (not that I've seen anyway!)

User avatar
Gojira san
Trc On!
Posts: 57
Joined: Fri Jan 09, 2015 3:04 pm
Location: Japan

Re: Minty.Fresh BN Sports Altezza

Postby Gojira san » Sat Jan 24, 2015 8:02 am

which red badge? i could just pop in to my local toyota dealer. :wink:

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: Minty.Fresh BN Sports Altezza

Postby peter0991 » Sat Jan 24, 2015 9:54 am

Its not a badge. Its a whole grille. Can find one in Japan for around £100 delivered
Image

Sask
Noob!
Posts: 15
Joined: Mon Aug 18, 2014 6:04 am

Re: Minty.Fresh BN Sports Altezza

Postby Sask » Sun Jan 25, 2015 12:30 am

This thing is too legit! Definitely an inspiration for what I want my Altezza to eventually become (if I keep it). Once I'm done uni I'd like to save up for a 2J.
Sorry if you've mentioned this already as I didn't look through your thread but I'm assuming your not using a drift button/spin knob? Guys in Japan are using the same one as a JZX100 I think so I'm going to grab one of those. Also you have experience with the stock diff? Thinking of using it until I can save up for a 1.5 way TRD.

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: Minty.Fresh BN Sports Altezza

Postby peter0991 » Sun Jan 25, 2015 1:32 pm

I'm not using a drift button at all. Just learned to use my thumb, lol. but I have looked at a jzx one and they look pretty similar. Could work. I'm running a is200 auto welded diff. Took the abuse really well.
Image

User avatar
j0hann3s
Noob!
Posts: 21
Joined: Thu Jan 30, 2014 10:07 am
Location: C:\Earth
Contact:

Re: Minty.Fresh BN Sports Altezza

Postby j0hann3s » Wed Mar 04, 2015 12:32 pm

What a great idea, to put the ecu at the airbag place!
Maybe I will do that to.
wrsm

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: Minty.Fresh BN Sports Altezza

Postby peter0991 » Tue Mar 10, 2015 11:07 am

Perhaps its time for an update...

http://youtu.be/1j23wDQeyZI

As seen above, I have now driven the tezza and its pretty insane. It actually pulls like a train and likes to spin the wheels up just by flooring the pedal :thumbs:

Been busy with the turd, but now that its through its Mot, I can get on with the work on the Altezza

Image

Sold my cosmis wheels to a local lad.

Image

Had to test them out on Eds soarer before they went though :nod: Note: 18x10 et0 on a soarer is :thumbs:

Image

Bought the remainder of bits that had to be fitted like hose clamps and pas lines and fitted everything up

Image

Took the bumper off to fill in the cut outs that were left from the old intercooler. Reinforced it a little bit more...just in case

Image

Got some federals fitted to the fronts

Image

Image

Sitting patiently waiting for an exhaust, which should be getting done in the next couple of weeks.

Image

Last couple of months have been so hectic and filled with a load of random stressful s@3! that I haven't had much time to make any progress with the Altezza. So I took some time off work to make some progress.

Image

Started off by installing the battery in the boot. Used all existing bits, just creatively bodged into place.

Image

Grounded in the engine bay

Image

Positive in the glovebox through a junction box

Image

Image

And the end result, still not secured down. Will sort that in the near future

Image

Next was to finish the wiring inside the car.

Image

Whipped my soldering iron out, finished off all the outstanding wires and tucked everything in my secret ecu stash compartment

Image

Boom! Job done

Image

Hopefully will have an exhaust by the end of next weekend
Image

User avatar
RS Tom-Hundred
Tezza Fanatic!
Posts: 449
Joined: Fri Nov 28, 2014 3:31 pm
Location: Cambridgeshire

Re: Minty.Fresh BN Sports Altezza

Postby RS Tom-Hundred » Tue Mar 10, 2015 9:17 pm

Nice one mate :) Good work!

User avatar
peter0991
Altezza Guru
Posts: 580
Joined: Wed Jun 22, 2011 10:29 am
Location: Aberdeen, Scotland

Re: Minty.Fresh BN Sports Altezza

Postby peter0991 » Mon Mar 23, 2015 12:39 pm

Finally finished my carbon spark plug cover..

Image

My housemate got some wheels for his soarer, so it would have been rude to not to try them on the altezza.

Image

Tight fit, and thats 18x9.5 et0

Image

I then went and got these 18x9.5 et -9 and a set of 5x114 faces to swap into them.

Image

My roof wing I made last year got blown off the car in a strong wind a few months ago and smashed on the floor. So that needed a rework. So I thought I'd go ahead and make a version 2 of the roof wing.

I didnt like how the old wing was pointing upwards too much, looked odd from some angles, so I decided to make the new one a bit flatter.

Image

Got the rough shape I wanted using high density foam and fiberglassed over the top.

Image

Image

Image

Quick test fit... still a fair way to go until the end.

Image

Image

My wheels got delivered.

Image

Image

Swapped the centers over and test fitted them!!

Image

Got some bits from Japan. Sard jet pump for jzx110

Image

68 degree thermostat

Image

Lets not forget the tee and hoodie from Jimmy Up with the altezza on it

Image

Along with a massive dildo to hit myself in the face with

Image

Time has come to get some decent wings...

Image

Image

Look way nicer than the rusty, tyre rolled oem wings....Not for long though!

Image

Image

Then we decided to have a play to see if we could match the offset of new wheels using some old 17x9 and a 35mm spacer. Got within 1mm. Rim poking past the side-skirt is what every BN kit needs.

Image

Image

Image

Then Paul 'The Fabricator Mate' as everyone knows him now, gave me a shout over the weekend to head over and get the exhaust made up!!

Image

Downpipe

Image

And the exhaust

Image

With some sexy tig welds

Image

Also I now really appreciate the benefit of vbands. Best invention ever!

Image

Sitting nice and high. Well, as high as it can be anyway.

Image

Image

Ran out of welding gas in the end, so didnt get the chance to finish the tail pipes yet. Pretty f*** happy with the exhaust, shame no one will see it under the car :cry:

Car sounds insane!
Image


Return to “Member's Cars / Projects”

Who is online

Users browsing this forum: No registered users and 3 guests