Page 5 of 15

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Wed May 23, 2012 11:03 am
by mlcoolj
ah now I see that they are resistors :lol: :lol:

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Fri Jun 08, 2012 6:28 am
by motorklasse
Because I just re-finished the stock fender, I thought I should post some pictures.
My IS is running 17x9 ET35 all around with 255/40/17 front and rear. :cool:
No spacers or anything.
17x9 ET35 clears the inner suspension without any mods.


Here are the photos!!
Image

Image

Image

Image




Some running shots. (No rubbing at all. :) )
Image

Image

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Sat Jun 09, 2012 12:39 am
by Mickymoe
just read this whole thread. awesome thread! awesome cars! awesome work!

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Tue Jun 12, 2012 8:22 pm
by Robin H
Awesome awsome thread

Loads of hard work and clever ideas

Tidy ladies :D

and track action

loving all the pic's and info keep this up

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Fri Jun 15, 2012 5:49 am
by motorklasse
Here are some quality photos of the interior. :)
Pictured equipment are...

-. BROS Laptor R1 Data logger
-. Personal Trophy steering wheel
-. Personal Drop gear knob
-. Personal Leather shift boots
-. Works Bell quick release
-. Willans 6pt harness


Image

Image

Image

Image

Image

Image

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Fri Jun 15, 2012 8:39 am
by mlcoolj
I like the datalogger... no money spared on this project.. serious car up until now!

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Fri Jun 15, 2012 7:44 pm
by tomo
Cool projects, some good work you're doing.

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Mon Jun 25, 2012 8:09 am
by motorklasse
Finalized the AEM EMS-4 tune.
Upgraded the crank & cam sensor wires to shield & twist pairs due to noise issue we had.

Image

Image



Also we had to convert the polarity of the stock sensor since AEM EMS-4 only accepts falling edge signals.
Image



We spend much hours to build up the quality of the tune.
Dual-VVTi is also enabled. We will get the dyno results once we have a chance. :)
Image

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Mon Jun 25, 2012 8:26 am
by mlcoolj
pfff... I'm just curious how much extra horsepower you get with your tune.. good work!

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Mon Jun 25, 2012 7:55 pm
by ISred02
Great work done,love the interior even if it is for race spec. I'd love to kit out my interior like that :D 8)

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Tue Jun 26, 2012 2:04 am
by E910
That things screaming out for ITB's now :mrgreen:
You should get some Denso IK20 or IK22 Iridium plugs. Will make it rev a bit better than platinum. If you want the long service life then Denso VK20/22 or NGK BKR6EIX11/BKR7EIX are worth getting.

More pics of the Korean ladies too! Smoking :wink:

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Fri Jul 06, 2012 6:28 am
by motorklasse
E910 wrote:That things screaming out for ITB's now :mrgreen:
You should get some Denso IK20 or IK22 Iridium plugs. Will make it rev a bit better than platinum. If you want the long service life then Denso VK20/22 or NGK BKR6EIX11/BKR7EIX are worth getting.

More pics of the Korean ladies too! Smoking :wink:



Not really a fan of Denso Iridiums. :)
Currently using NGK BKR6EIX11, but due to added power I am thinking about switching to colder plug such as NGK PFR7G-11S (S2000 stock plugs).

I will post up more girls once I get back from this weekend race day. :mrgreen:

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Wed Jul 18, 2012 9:30 am
by motorklasse
Finally got the 1st place on my class from last weekend!! :)

The car ran perfectly fine except it is running lean between 7,000-8,000rpm.
Because I was running stock fuel pump(for 155hp car), I have upgraded to S2000 fuel pump after the race. Gotta check how it runs now.

Anyways, here are some photos from the event. Enjoy!

Image

Image

Image

Image

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Wed Jul 18, 2012 10:02 am
by banan1984
I'd say You will defo fill the difference with new pump. Oh the womans.. like from some good fancy anime :D

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Posted: Mon Jul 30, 2012 3:56 pm
by lakers
banan1984 wrote:I'd say You will defo fill the difference with new pump. Oh the womans.. like from some good fancy anime :D

^^^^^^^^^^^^ xxx 110 :lol: :lol: :lol: :lol: love the girls on the picture.