Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Once you've introduced yourself why not throw up a few pictures of your car or a project thread?
User avatar
mlcoolj
Altezza Guru
Posts: 1740
Joined: Tue Oct 20, 2009 8:14 pm

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby mlcoolj » Fri Nov 23, 2012 8:35 am

the hood of the tezz/is200 is very heavy or at least feels so...
Image

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Wed Dec 12, 2012 6:24 am

Attained 4AG black top ITB for the winter project! :)
Gotta clean it and install with other parts.


Image

Image

Image
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.

User avatar
mlcoolj
Altezza Guru
Posts: 1740
Joined: Tue Oct 20, 2009 8:14 pm

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby mlcoolj » Fri Dec 14, 2012 12:09 pm

whoa! good stuff man! I'm keen to see what the power output before and after the install will be..
Image

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Mon Jan 07, 2013 4:57 am

Started working on putting 4AG throttles into 3S-GE.
It's PITA because lots of modification required to make it fit.
After some good search and discussions, we decided to just weld to 3S-GE manifold.
I will keep posting the updates. :)


Image

Image

Image

Image

Image

Image

Image
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Thu Jan 17, 2013 8:58 am

Changed timing belt, water pump and etc while I was at installing ITBs.
Image



Finished mounting ITBs onto 3S-GE intake manifold. :clap:
Image



Also installed oil catch tank while I was at it.
Image


Although I need to wait for the velocity stacks and filter, I already started on AEM EMS-4 tuning. :)
Image
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.

User avatar
donut46
Meath Rep
Posts: 2119
Joined: Sun Sep 07, 2008 8:55 pm
Location: navan co. meath
Contact:

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby donut46 » Thu Jan 17, 2013 10:20 am

I love this build!!!
QUALITAT ALTEZZA

Please Support Your Club
viewtopic.php?t=8309&f=2

TezzaWorld Car Stickers
viewtopic.php?f=16&t=8724&hilit=stickers

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Mon Jan 21, 2013 10:13 am

donut46 wrote:I love this build!!!



Thanks! Here is more updates.

While I am waiting for the Velocity stacks and Uni-filter for the ITBs, I decided to install poly-carbonate windows.
It should save me at least 30lb since I am removing window motor/regulator and etc. :)



Image

Image

Image

Image

Image

Image
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.

User avatar
lakers
Tezza Fanatic!
Posts: 209
Joined: Mon Feb 14, 2011 6:42 pm

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby lakers » Tue Jan 22, 2013 10:40 pm

can wait to see the power does itbs put out :D
To find yourself, think for yourself © Socrates 469 BC

User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby E910 » Tue Jan 22, 2013 11:02 pm

This build gets better every time I look at it.

User avatar
mlcoolj
Altezza Guru
Posts: 1740
Joined: Tue Oct 20, 2009 8:14 pm

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby mlcoolj » Wed Jan 23, 2013 1:22 pm

that's just mad! great stuff man!! Keep it up!
Image

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Thu Jan 24, 2013 6:14 am

I swapped stock 4.1 final gear with 4.3.
With added power with ITB, 4.3 gearing should resolve long 3rd gear acceleration. :)
Image

Image



Also replaced stock rear knuckle pillow-ball bushing with Hardrace since the stock one had much play.
Had to fabricate own special tool to push out the stock bushing without disassembling whole wheel hub. :D
Image

Image

Image


Old stock bushing.
Image



New hotness Hardrace bushing! :)
Image
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.

User avatar
mlcoolj
Altezza Guru
Posts: 1740
Joined: Tue Oct 20, 2009 8:14 pm

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby mlcoolj » Thu Jan 24, 2013 2:46 pm

I want that tool you're using! :lol: good stuff man.. how much power do you think she'll be puting out?
Image

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Fri Jan 25, 2013 1:51 am

mlcoolj wrote:I want that tool you're using! :lol: good stuff man.. how much power do you think she'll be puting out?



I would say 200-220rwhp? :)
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.

User avatar
j2jedi
Trc Off
Posts: 93
Joined: Sun Oct 23, 2011 12:17 am
Location: Amsterdam, The Netherlands

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby j2jedi » Sat Feb 02, 2013 9:58 pm

Very, very, VERY impressive! You guys are doing it the right way.
Here in the Netherlands people have tried racing the IS200 but only with the 1gfe engine. They had no real successes.
Competitors raced cars like the BMW 3-series. Putting in the 3sge you showed that a few good races can be one with the Altezza/IS body 8)
Keep up your nice work!

motorklasse
Trc Off
Posts: 109
Joined: Sat Mar 03, 2012 7:34 am
Location: Seoul, Korea

Re: Club Racer project : TWO IS200s(LHD) with 3S-GE swap!!!

Postby motorklasse » Mon Feb 04, 2013 6:24 am

Thank you! :)

Installed Techno Toy Tuning's velocity stacks and Uni-filter.
Now it's time to finalize the tune with AEM EMS-4. :)

Image
For weekend : 2011 MB C63(Euro-spec)
For daily : 2003 BMW 320i(Euro-spec), 2.2L I-6 w/5-sp manual.
For track : 2001 Lexus IS200 w/3S-GE, 6-sp manual swap.


Return to “Member's Cars / Projects”

Who is online

Users browsing this forum: No registered users and 1 guest