Greddy parts available from XnickX

[Noel]

Yup you got it similar to the RSM, but does way more and all in colour, easier to mount and plug in, and the ease of being able to transfer it from car to car

Does it do the speed cut like the RSM?

i know the RSM doesn't work with auto's ... does this?

[xnickx]

Got it infront of me, and without having to open the packing to test the unit here is what I can understand from the manual:

Revs (RPM)
Speed (KM/H or MPH)
Ignition Timing (degrees)
Throttle position (%) - cable
Throttle voltage (V) - fly by wire
Water temp (C or F)
Inlet temp (C of F)
Airflow (V)
Airflow% (%)
Inlet manifold pressure (bar) - AKA Boost!
Airflow (G/S) - ???
Injector Timing (Milliseconds)
Injector Duty Cycle (%)
Air to Fuel ratio
Inlet Valve Timing (degrees)
Exhaust Valve Timing (degrees)
Gear position - for Tiptronic and Autos
Power - (PS or HP)
Trip meter (km or m)
Fuel consumption - instant (KM/L or MPG)
Fuel consumption - average (KM/L or MPG)
Fuel consumption - total (KM/L or MPG)
Fuel consumption - selected section (KM/L or MPG)
Total fuel in tank - (L or G)
Calculated fuel cost - Yen or Dollar (you tell it how much it costs per litre)
Fuel system - ???
Short term fuel trim - (%)
Long term fuel trim (%)
Oxygen sensor voltage (V)
Battery voltage (V)
Wastegate solenoid duty cycle (%)
Auto Trans Fluid Temp (C or F)
Exhaust manifold temp (C or F)
Ex Temp V (V) - ???
4WD Ratio (%)
Fuel Pressure (psi or bar)
Fuel temp (C or F)

[Rob]

Is there a fitting guide we can see? Just trying to gauge how difficult it might be to install.

[xnickx]

LOL there isnt any fitting to do!

Just plug the unit into the plug by your right knee, and mount it and away you go!

No wires to join, just literally plug in, just tested one just then on my car.

All units from me are in FULL ENGLISH not the half english half japanese ones you see floating around on Ebay and other internet sites.

Comes with all mounting brackets and allen keys for the mounts.

It DOES NOT remove speed cut or rev cut like the RSM, as this only plugs into the car and doesnt intercept any signals

[d8vyr]

hi m8, could this be used to replace the speedo/ rev counter etc. i hope my anglia 95 mph speedo will be useless once the beams is fitted, so i`m on the lookout for something to make a custom dash with. cheers davy

[Skulls]

I'm looking for a turbo manifold for my SXE10 3S-GE to fit a Garrett GT2860R

[EireAltezza]

hey man have you got pictures and prices for the oil cap rad cap and gearknob?

[Damok]

hey man have you got pictures and prices for the oil cap rad cap and gearknob?

Email nick if you want info or prices dude...

[tezz'n turbo]

hi nick can you get this in/ are you running it yourself?

http://i01.i.aliimg.com/img/pb/503/489/ ... 03_652.jpg

[Soiled]

Email him at nick@nst.co.nz, he's running a different throttlebody all together.