ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

Breaking rs200 altezza

Have a part for sale? Put it in here
initial_j
Trc On!
Posts: 51
Joined: Thu Dec 30, 2010 11:03 am

Breaking rs200 altezza

Postby initial_j » Sat Jan 17, 2015 5:06 pm

Nearly all parts available
Last edited by initial_j on Sun Mar 22, 2015 4:55 pm, edited 1 time in total.

Sj_fame
Noob!
Posts: 13
Joined: Tue Jan 27, 2015 2:48 am

Re: Breaking rs200 altezza

Postby Sj_fame » Tue Jan 27, 2015 2:52 am

Are you willing to sell the throttle body ?

initial_j
Trc On!
Posts: 51
Joined: Thu Dec 30, 2010 11:03 am

Re: Breaking rs200 altezza

Postby initial_j » Tue Jan 27, 2015 7:02 am

no mate, engine goes complete.

its looking highly likely im going to be buying a tiptronic rs200 and manual converting it so will just be the engine up for sale and any stock bits from the car that i dont need

i may have a diff for sale depending on what my new altezza comes with

mxconnor91
Noob!
Posts: 22
Joined: Fri Sep 26, 2014 11:03 pm

Re: Breaking rs200 altezza

Postby mxconnor91 » Tue Jan 27, 2015 10:01 pm

Have the prop shaft? What condition is it? Are the UJ's free?

turbotezza
Trc Off
Posts: 66
Joined: Fri Dec 06, 2013 8:48 am

Re: Breaking rs200 altezza

Postby turbotezza » Wed Jan 28, 2015 6:37 am

how much is engine dude?

initial_j
Trc On!
Posts: 51
Joined: Thu Dec 30, 2010 11:03 am

Re: Breaking rs200 altezza

Postby initial_j » Wed Jan 28, 2015 8:45 am

regards to the prop and engine questions

ive just picked up a low mileage auto altezza (still 4 pot beams engine)

So im going to swap my manual setup into it, including my engine.

not sure if ill need the prop, im guessing they might be different and i will need it?

I will be selling the beams engine out of the auto. its done around 60k and in good working order. Will be looking for around £600 for it.

Driftbadger
Noob!
Posts: 5
Joined: Tue Nov 19, 2013 1:22 pm

Re: Breaking rs200 altezza

Postby Driftbadger » Wed Jan 28, 2015 7:01 pm

Hey don't suppose you have the brake callipers? If so what condition as I'm after front passenger and rear drivers please

Trd Shane
Tezza Fanatic!
Posts: 232
Joined: Mon Dec 02, 2013 10:44 pm
Location: Dublin

Re: Breaking rs200 altezza

Postby Trd Shane » Wed Jan 28, 2015 8:02 pm

Any oem radio brackets
"If it can't be fixed with a hammer it's an electrical problem"

Trd Shane
Tezza Fanatic!
Posts: 232
Joined: Mon Dec 02, 2013 10:44 pm
Location: Dublin

Re: Breaking rs200 altezza

Postby Trd Shane » Wed Jan 28, 2015 8:03 pm

I'd be willing to buy the climate control unit if the brackets come with it ??
"If it can't be fixed with a hammer it's an electrical problem"

initial_j
Trc On!
Posts: 51
Joined: Thu Dec 30, 2010 11:03 am

Re: Breaking rs200 altezza

Postby initial_j » Wed Jan 28, 2015 11:18 pm

trdshane- yep got climate control, which brackets are you missing? picture would be great

driftbadger- pm on its way

User avatar
millo73
Trc Off
Posts: 132
Joined: Sun Oct 17, 2010 12:01 pm
Location: yeovil

Re: Breaking rs200 altezza

Postby millo73 » Tue Feb 10, 2015 6:36 pm

Is the radiator available?
Image


Tomtom shows the way

MrSherbertmelon
Noob!
Posts: 20
Joined: Mon Feb 16, 2015 8:47 am

Re: Breaking rs200 altezza

Postby MrSherbertmelon » Mon Feb 16, 2015 8:51 am

Hi mate, have you got the original speedo cluster available? If yes what's the mileage on the odometer?

User avatar
Squire
Altezza Guru
Posts: 1633
Joined: Sat Jul 04, 2009 3:41 pm
Location: Kilkenny

Re: Breaking rs200 altezza

Postby Squire » Tue Mar 10, 2015 12:29 pm

Passenger side headlight available?
CAUTION!!....1 JZ Conversion under Construction!!

TEZMANIAN DEVIL!!

TOC Link- http://toyotaownersclub-irl.forumotion.com/u3- http://www.bebo.com/Pip_Dunne


Return to “Parts for sale”

Who is online

Users browsing this forum: No registered users and 1 guest

cron