Page 1 of 1

altezza rs200 turbo breaking for parts

Posted: Sun Dec 14, 2014 2:55 pm
by twiglett-RS200
altezza turbo breaking for parts

Here is a clearer advert for my altezza.
first things first.
its a 1999 T reg.
its done 34000 ish km and 18000 ish miles so its probably at about 50000 miles in total.
tax and mot run out now
engine wise.
it has a greddy turbo kit fitted (done in japan)
HKS F-CON gold v pro late version ecu running a map sensor. I think its a version 3.3
lowered compression using an HKS 1.6mm head gasket. possibly forged internals as the piston tops are shiny and different to standard.
550cc sard injectors.
supra fuel pump in the standard hanger.
greddy front mount and hard pipe kit with a blitz BOV installed before the throttle body (not connected at the moment)
koyo alloy radiator with new samco silicon hoses.
new alternator and belts last November.
new £1100 exedy hyper single clutch and flywheel kit last July only done about 2500 miles
gearbox even though it has been rebuilt crunches every so often into third at very high revs.
blitz dsbc boost controller.
depo boost guage.
gloss black painted engine bay
purple cooling panel.
custom made 3" exhaust that was only fitted in august.
bodywork.
vented one off fibreglass bonnet with pins.
genuine c-west front bumper trimmed slightly for fitment of intercooler.
TRD skirts and rear bumper lip.
rolled and pulled arches.
lacquer peel on bootlid and spoiler.
wind deflectors
free scratches and rub marks ( adds character)

chassis.
cusco upper braces
trd lower braces.
hks hypermax coilovers in excellent condition.
new brakes all around.
solid rear diff mounts
new genuine balljoints.
Enkei rp01 17x9/10 with practically new tyres( falkens on the rear)


Interior
half leather and alcantara electric seats (drivers side needs wires connected)
standard steering wheel
no headunit.
uprated speakers.
jdm air purifier.
extra dark privacy glass in the rear.

pricing
drop in package to boost an altezza is £3k (thats everything you need including loom and brand new exhaust. it would just require some spanner time to get things swapped over, no other items to purchase)
gt2871rs in excellent condition with braided lines £500
tial 38mm external wastegate with a screamer pipe £150
hks hypermax coilovers in excellent condition £330
all braces from the car £300
wheels with tyres £270
diff and shafts and solid mounts £150
koyo copper radiator £180 (with samco black hoses £200)
blitz dsbc £150
trd altezza cluster (very rare) £250
one off fibreglass vented bonnet £250
bumpers and skirts £250
toyota sat nav kit £100
bride lowmax on is200/ altezza rails £200
all glass £100
beatrush underpanel £100
purple anodised cooling panel £25
all arms and hubs and brakes (nearly new) £250
interior £100
depo boost gauge £25
all lights front and rear £150

I will get some pictures of the damage if somebody wants it as a complete car.
I can get the smaller parts off before Christmas but the larger parts that determine whether I break it or not will require a bit of workshop space that I would have to give prior warning of.

I will only break it if more than £2k worth of parts are spoken for with deposits.

collection would be preferred from west Kent.
if you want to contact me to ask questions please keep it in this thread.

Re: altezza rs200 turbo breaking for parts

Posted: Tue Dec 16, 2014 4:02 am
by G-TECroscommon
I might be interested in the clutch kit. Solid diff mounts, wastegate and screamer pipe and intercooler kit if you end up spliting the turbo package :)

Re: altezza rs200 turbo breaking for parts

Posted: Fri Dec 19, 2014 7:09 pm
by kiewi
how much you looking for, for clutch

Re: altezza rs200 turbo breaking for parts

Posted: Tue Dec 23, 2014 8:40 am
by turbotezza
may be interested in bottom end and turbo if you split mate

Re: altezza rs200 turbo breaking for parts

Posted: Sat Dec 27, 2014 7:38 am
by matty
Hi
I'll take the chassis bracing, exhaust, arms/hubs and maybe radiator.
Let me know, Mat

Re: altezza rs200 turbo breaking for parts

Posted: Sun Jan 04, 2015 8:18 am
by matty
matty wrote:Hi
I'll take the chassis bracing, exhaust, arms/hubs and maybe radiator.
Let me know, Mat


Any update on this?

Re: altezza rs200 turbo breaking for parts

Posted: Mon Jan 05, 2015 3:49 pm
by alexlegault
whats the best price you can for the ECU? FCon vpro? will it be able to tune dual vvti???

Re: altezza rs200 turbo breaking for parts

Posted: Tue Jan 06, 2015 7:28 pm
by millo73
Is radiator still available and ifso how much ?

Re: altezza rs200 turbo breaking for parts

Posted: Wed Jan 07, 2015 10:47 pm
by twiglett-RS200
everything is still available as i haven`t started breaking it up yet.
im waiting for someone to get back to me about having the whole car so when i know for certain i will update this thread.

Re: altezza rs200 turbo breaking for parts

Posted: Tue Jan 13, 2015 8:25 pm
by EireAltezza
woulde be interested in the coilovers and cooling panel and a exhaust if you have one

Re: altezza rs200 turbo breaking for parts

Posted: Mon May 04, 2015 4:33 pm
by tommysheen
These parts still available? I'm interested in the injectors and fuel pump posted to ireland if you ended up breaking. Thanks.

Re: altezza rs200 turbo breaking for parts

Posted: Wed May 06, 2015 12:21 am
by Escy
I've got the engine and all the turbo bits now.

Re: altezza rs200 turbo breaking for parts

Posted: Sat May 09, 2015 9:22 am
by tommysheen
Escy wrote:I've got the engine and all the turbo bits now.

No bother then sound.