Code P1354

[Cathalsully-Tez]

Hi my car seems to be running weird so looking for help yet again, got my obd port working so was able read codes and got p1354 vvt solenoid, had 2 spare out of my old engine and changed them out but problem is still there, if I delete codes the car will run perfect for a good 2 miles until the eml will come on again and goes off itself each time then the car is down on power and at 2000rpm there a little dead spot/shutter... anyone come across it been like this before have seen other posts with this code but changing the solenoid Normally fixes it for them...

[RS Tom-Hundred]

Presumably, once the EML comes back on and the rough running occurs, the original error code comes back?

[Cathalsully-Tez]

Yes once I clear codes and drive the car for a bit the eml will come on turn off after 30 seconds or so and when I read it again it’s the orginal p1354 code again each time, took it for a good drive today 200 miles or so, and drives great only for this it’s like as if the car is going into limp mode once the light comes on,