I'm looking for a set of rear hub bushes, they are the bushes that connect the bottom of the hub assembly to the bottom arm.... they can't be got off toyota as they only sell the hub as a complete unit but i have heard that you can get the bushes on their own...
Get on to Evelyn, she knows real mechanics who will make a vectra bushing fit Rumour has it that McGuiver knocked up a load of women in that neck of the woods so theres a load of creative little f*** down there now
done these myself recently. there are 2 bushings in the hub. the smaller one can be got off fensport uk, it's number10 on their list. the bigger one and this is the one i presume u want is i think impossible to get. i tried everywhere and it wasn't listed. i don't think they are sold without the hub which will cost u about €600 for both hubs. if u can do without your car for a day or two get the old ones taken out. get bmw ones, they are slightly bigger so get a engineer to skim them to match the old ones. thats what i done anyway and they are perfect now. the bmw ones were €25 euro each plus €25 to get them skimed. better than the €600 toyota want
Here ya go Joe Ya vectra bushings will do the trick get them in the motorfactor way cheaper that dealer just ask for rear wishbone bushing for a vectra. You will have to get them skimmed down a wee bit and you a few extra washers either side of the bold but it does the trick Ur right Lanigan Vectras from 96-01 Nick viewtopic.php?f=19&t=3290