Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

is300 strut

General discussions about other Lexus models
User avatar
corn67
Trc Off
Posts: 124
Joined: Mon Oct 06, 2008 10:38 pm
Location: clara co offaly

is300 strut

Postby corn67 » Fri Nov 20, 2009 5:45 pm

hi guys just wondering would an is300 strut brace fit altezza :?: :?: :?: :?: cheers
There should be two penalty points for cars that dont go sideways............

User avatar
E910
Altezza Guru
Posts: 1587
Joined: Sun Aug 03, 2008 4:47 am
Location: New Zealand
Contact:

Re: is300 strut

Postby E910 » Fri Nov 20, 2009 8:47 pm

It should do. I think the 2JZGE is higher than the 3SGE so there shouldn't be any clearance issues.

What the price like? You can get GReddy & Ultra through Nick

viewtopic.php?f=40&t=5144

viewtopic.php?f=40&t=4293

User avatar
corn67
Trc Off
Posts: 124
Joined: Mon Oct 06, 2008 10:38 pm
Location: clara co offaly

Re: is300 strut

Postby corn67 » Fri Nov 20, 2009 10:28 pm

its 75 dollars delivered to me off ebay from the us and will send as gift so wont be taxed :D :D
There should be two penalty points for cars that dont go sideways............

User avatar
Dan
Site Admin
Posts: 3792
Joined: Sat Feb 24, 2007 3:43 pm
Location: Dublin

Re: is300 strut

Postby Dan » Sat Nov 21, 2009 2:14 pm

you still can get stung for tax when its marked as gift. if its too high though it will be rubbing off the bonnet lining and get wrecked in no time, might even stop the bonnet from closing properly, maybe just get one suited for altezza

User avatar
KaTaLy5t
Altezza Guru
Posts: 2611
Joined: Sat Nov 10, 2007 12:08 pm
Location: Wexford

Re: is300 strut

Postby KaTaLy5t » Sat Nov 21, 2009 3:18 pm

I've a Juran Evolution brace on mine it just about rubs on the bonnet lining. If the IS300 brace is any higher than the one I have it'd destroy the lining or stop the bonnet from closing like Dan said.

User avatar
corn67
Trc Off
Posts: 124
Joined: Mon Oct 06, 2008 10:38 pm
Location: clara co offaly

Re: is300 strut

Postby corn67 » Sat Nov 21, 2009 4:50 pm

Oh i see i may check the measurement's if there is any so might put them up see if anyone knows . As soon as i get them will pop them up cheer's guys
There should be two penalty points for cars that dont go sideways............

User avatar
KaTaLy5t
Altezza Guru
Posts: 2611
Joined: Sat Nov 10, 2007 12:08 pm
Location: Wexford

Re: is300 strut

Postby KaTaLy5t » Sat Nov 21, 2009 5:00 pm

Mine measures 55mm from the top of the engine cover to the top of the brace and I measured from the inside of the mount closest to the inlet plenum to the top of the brace and thats 155mm. Hope that helps you if you can get the measurements for your one. Mine doesn't touch the bonnet lining in the middle only at the sides where the bend is in the brace.

User avatar
corn67
Trc Off
Posts: 124
Joined: Mon Oct 06, 2008 10:38 pm
Location: clara co offaly

Re: is300 strut

Postby corn67 » Sun Nov 22, 2009 9:05 pm

Thanks for those have to email him tomorrow see can i get them off him so finger's crossed ha . I dont have a linner in my car anyway so small bit more room ha ha cheer's will let ya know how i get on
There should be two penalty points for cars that dont go sideways............


Return to “Lexus IS200,IS220,IS250”

Who is online

Users browsing this forum: No registered users and 1 guest

cron