mike_01 wrote:Mirrors should be the same, but depending on your wiring in the tezza as some features like heated mirrors wouldn't work and would ave to be wired up if you wanted them.
The lights would be the same as above as the 200/300 would have an electric adjuster so some features may not work.
Think the standard offset is 42 but not 100% sure
Damok wrote:The head lights are different and require work to fit. One or two people of the site have got headlights from ebay and they took a while to fit.
Damok wrote:I wouldnt see why the mirrors wouldnt fit I'm not sure though, but most IS300 parts are american so factor that in when you look, If the head lights are american then the alignment will be to the wrong side.
As for wheels, This might be of use viewtopic.php?f=18&t=475
mike_01 wrote:Good point didn't think of the mirrors being handed, although you may be able to angle them enough or get the replacement mirror glass to stick over the top.
Could I just ask why are you putting is300 mirrors on the tezza why not just source some is200 in the uk breakers or where ever you are
found this in a post
Rim Width: 7J
Rim Diameter: 17 inches
Number of Studs: 5
Stud Diameter: 114
Users browsing this forum: No registered users and 2 guests