Mr. Tezza wrote:I presume its a standard head unit so yea...
Let me think.... ur gonna have to undo the bolts at the top of the headunit anyway they are under a plastic cover, also think you have to remove the plastic where the TRC and SNOW buttons are, the whole dash unit comes out as one piece so you gotta try and find where all the bolts are its easy enuf really just make sure you don't scratch the plastic around the centre console area like i did
Dan wrote:should be the same way to remove the Kenwood. 4 bolts, 2 at the top, 2 at the bottom. If you have the sat nav screen, you have to pop the plastic cover off that to reveal to screws then lift it out and up and it will reveal 2 bolts. The other 2 bolts are behind the TRC bit, which just needs a good pull towards you.
Users browsing this forum: No registered users and 2 guests