Page 2 of 2

Re: Drift button drawing

Posted: Mon Jul 01, 2013 11:54 pm
by poTTa
Is this really tezza specific?

Re: Drift button drawing

Posted: Mon Jul 01, 2013 11:56 pm
by peter0991
Im pretty sure no other fly off buttons fit our cars without additional machining

Re: Drift button drawing

Posted: Tue Jul 02, 2013 1:42 pm
by poTTa
Yeh...i realize that now...
Just wanted to be sure before I get my machine shop to make it

Re: Drift button drawing

Posted: Sun Aug 11, 2013 1:14 am
by Lextcy2001
Hi All, Im new to Tezzaworld. I have recently had a go at making a spin knob for our cars from the drawing originally posted on this forum. I came across it on the Altezza Club forums and through I would post the results up here for the International Community.

Image

I had to modify the drawing a bit to get it to work, but it does work.

Image

the only major changes I made to the drawing were to take 10mm out of the total length, and to add a slight taper to the main shaft ( 13mm diameter at the front edge and 13.5mm diameter at the knob end).

Re: Drift button drawing

Posted: Wed Sep 04, 2013 10:14 am
by peter0991
Hey man. Just saw this...Any reason for making it 10mm shorter? Does it stick out too far? Im guessing the taper is for clearance?

Re: Drift button drawing

Posted: Wed Oct 30, 2013 8:25 pm
by tmx89
Hi I have a question about this drift button ? It is works like this on this video ? http://www.youtube.com/watch?v=mmG806RibNI ?