Image Please bare with us while we are carrying out some much needed maintenance to the forum. New look coming soon!

Search found 356 matches

Go to advanced search

by ESXTEZZ
Sun Dec 29, 2013 9:31 pm
Forum: Engine & Transmission section
Topic: WTK: how much HP altezza RS200 will have with these mods?
Replies: 30
Views: 11272

Re: WTK: how much HP altezza RS200 will have with these mods

At a guess I would say roughly 270bhp, what ecu you using ? There are loads of tuners about that don't know how or won't spend the time tuning the vvti and say it gives hardly any gains. This is complete bull and the gains that can be had are worth the extra dyno time of finding a good tuner. The st...
by ESXTEZZ
Tue Dec 24, 2013 3:21 pm
Forum: Engine & Transmission section
Topic: Do you realy need a manual ecu for a manual to auto
Replies: 4
Views: 410

Re: Do you realy need a manual ecu for a manual to auto

Ive got a 98-2001 manual ecu. £60
by ESXTEZZ
Thu Dec 12, 2013 5:38 pm
Forum: Engine & Transmission section
Topic: who is using an apexi power fc with boost
Replies: 3
Views: 547

Re: who is using an apexi power fc with boost

See this thread on Subaru AVCS. Very educating. http://romraider.com/forum/viewtopic.php?f=15&t=7973" onclick="window.open(this.href);return false; Also, speaking from experience it's impossible to tune VVTI and spark without dyno. Cheers dude, some good info there. Tomo, have you got a hand co...
by ESXTEZZ
Wed Dec 11, 2013 10:32 am
Forum: Engine & Transmission section
Topic: who is using an apexi power fc with boost
Replies: 3
Views: 547

who is using an apexi power fc with boost

I'm interested to see the vvti maps that people are using with their turbo or supercharger setups. I tuned mine myself originally then it has been tuned again by another tuner local to me and made good power. I was Speaking to a friend of mine in the states last night who is a very well known tuner ...
by ESXTEZZ
Mon Dec 09, 2013 10:15 pm
Forum: Engine & Transmission section
Topic: will a td05 fit a greddy turbo manifold
Replies: 1
Views: 336

will a td05 fit a greddy turbo manifold

If you are using the greddy turbo manifold can the standartd td04 be swapped for a td05 ?? are there any clearance issues
by ESXTEZZ
Fri Dec 06, 2013 9:50 am
Forum: Engine & Transmission section
Topic: please help! what turbo should I get
Replies: 4
Views: 650

Re: please help! what turbo should I get

Hi guys am New here so big hello to everyone :mrgreen: I've just brought myself a altezza rs200 with turbo conversion but turbo was missing. I buy n sell the odd motor but got this for myself. Everything is there except turbo has apexi fc. What my question is. Is what's the best turbo for the beams...
by ESXTEZZ
Fri Dec 06, 2013 9:45 am
Forum: Engine & Transmission section
Topic: Compression Test Values?
Replies: 7
Views: 543

Re: Compression Test Values?

For reference, mine were 165 across all 4 after 1k miles on a newly built 10:1 3sge. Stock engine was 75k engine were 185 psi within a few psi of each other
by ESXTEZZ
Thu Dec 05, 2013 3:06 pm
Forum: Engine & Transmission section
Topic: Compression Test Values?
Replies: 7
Views: 543

Re: Compression Test Values?

If you disconnect the ecu that will stop the fuel being thrown in and also stop the valve timing moving on start up. The difference is around 30 or 40 psi on the cars I've tried
by ESXTEZZ
Thu Dec 05, 2013 11:53 am
Forum: Engine & Transmission section
Topic: Compression Test Values?
Replies: 7
Views: 543

Re: Compression Test Values?

That seems very low, it's good that they are all the same tho.
Did you disconnect the ecu when cranking it over ?
by ESXTEZZ
Wed Dec 04, 2013 10:47 am
Forum: Where to buy??
Topic: swap for my 4.7 final gear set
Replies: 0
Views: 781

swap for my 4.7 final gear set

I'm after a 2001 onwards altezza 4.3 final gear set for my car, it's currently fitted with an aftermarket 4.7 gear set. I'm running a lot of power now and need a lower gearing setup.
by ESXTEZZ
Fri Nov 29, 2013 4:56 pm
Forum: Cars for sale
Topic: boosted altezza rs200
Replies: 6
Views: 2636

Re: boosted altezza rs200

Nice car, good luck with the sale.

Did you use to have an ATR
by ESXTEZZ
Tue Nov 26, 2013 5:52 pm
Forum: Visual & Exterior section
Topic: Rotors
Replies: 7
Views: 854

Re: Rotors

Ae111RS200 wrote:
altezza kc wrote:is300 ones will fit

thanks alot but are you 100% sure they will work? would be a long way to ship them to the caribbean and they don't work :(



yes they will fit 100%
by ESXTEZZ
Tue Nov 26, 2013 5:50 pm
Forum: Engine & Transmission section
Topic: Disabling the vvti!
Replies: 7
Views: 774

Re: Disabling the vvti!

With the stock ecu the car wont run. You will have to go aftermarket ecu and swap cam gears.
by ESXTEZZ
Tue Nov 19, 2013 8:15 pm
Forum: Car chat
Topic: Thinking on getting some coilovers what make is best?
Replies: 11
Views: 1465

Re: Thinking on getting some coilovers what make is best?

Most of the coilovers below 1k are pretty similar to be honest mate, you will probably find most are made in the same factory with slightly different valve setups. Find a local distributer that is prepared to offer good after sales support and see what he sells. Have a look at the BC, HSD and buddy ...
by ESXTEZZ
Mon Nov 18, 2013 7:19 pm
Forum: Car chat
Topic: Thinking on getting some coilovers what make is best?
Replies: 11
Views: 1465

Re: Thinking on getting some coilovers what make is best?

What do you intend to use the car for ? what is your budget ?

Go to advanced search